Launch Pic!
Thread Starter
Joined: Jun 2002
Posts: 13,576
Likes: 30
From: Harford County, MD
Car: camaro sportcoupe
Engine: 7.0L
Transmission: G-Force GF5R
Axle/Gears: Moser 9"
Launch Pic!
i posted this on the Organized Drag Racing board, but it's such a good picture i had to let everyone see it, even those who don't frequent the other parts of the site:
nice i wish i could have been there. friday reall disapointed me and i had to work. 14.4 was no were close to were i should be. my tranny is hurting me so bad. but anyway looks good.
Supreme Member
iTrader: (25)
Joined: Jul 2004
Posts: 2,623
Likes: 0
From: Beautiful BC
Car: '88 IROC-Z / '91 Z28 / '91 GTA
Engine: LT4 Hot Cam 305 / L98 355 / MR 383
Transmission: 5-spd / 700R4 / 700R4
Axle/Gears: 3:45 / 3:23 / 3:23
uh oh.. I see rubber on those rear quarters! 
Thread Starter
Joined: Jun 2002
Posts: 13,576
Likes: 30
From: Harford County, MD
Car: camaro sportcoupe
Engine: 7.0L
Transmission: G-Force GF5R
Axle/Gears: Moser 9"
ran 13.3's with a massive headwind and no air yesterday, has gone 13.0's.
Trending Topics
Supreme Member
Joined: Oct 2002
Posts: 2,378
Likes: 0
From: Thornton colorado
Car: 91 Camaro RS
Engine: TBI
Transmission: 700r4
Lotsa rubber on teh quarters
i need to get mine out before the track is closed up for the winter, i'm finally off weeknights and the first week the car was torn apart, last week we got to the track and they rained out about 10 minutes later, atleast it stayed clean in the trailer, tonight the weather sucks, i have next wednesday so it better be nice out or i wont be able to see what i've done with this combo
i need to get mine out before the track is closed up for the winter, i'm finally off weeknights and the first week the car was torn apart, last week we got to the track and they rained out about 10 minutes later, atleast it stayed clean in the trailer, tonight the weather sucks, i have next wednesday so it better be nice out or i wont be able to see what i've done with this combo 
Joined: Sep 1999
Posts: 1,405
Likes: 8
From: Grand Rapids, MI
Car: 1985 IROC-Z
Engine: Magnacharged LS1
Transmission: T56
Axle/Gears: Ford 9" 4:11's
Originally posted by SnkSknrZ28
Heres me, bad pic but oh well
Heres me, bad pic but oh well
Joined: Oct 2002
Posts: 1,866
Likes: 5
From: Salem, NH
Car: 1999 Z28
Engine: LS1
Transmission: 4L60E
Axle/Gears: 3.23 10 Bolt
nice launch. heres mine but its not a 3rd gen, stock 130k suspension lol runs 14.5s. left front off the ground he he he
Image removed- Non-thirdgen related.
Image removed- Non-thirdgen related.
Last edited by MetalliCamaroRS; Oct 1, 2005 at 09:51 AM.
Senior Member
iTrader: (3)
Joined: Apr 2005
Posts: 890
Likes: 0
From: Hickory, NC
Car: 1991 Camaro RS, 1993 Camaro Z-28
Engine: what engine, LT1
Transmission: did it come with one, 4l60
Axle/Gears: They spin (most of the time)
Originally posted by irocbirdbuilder
Lotsa rubber on teh quarters i need to get mine out before the track is closed up for the winter, i'm finally off weeknights and the first week the car was torn apart, last week we got to the track and they rained out about 10 minutes later, atleast it stayed clean in the trailer, tonight the weather sucks, i have next wednesday so it better be nice out or i wont be able to see what i've done with this combo
Lotsa rubber on teh quarters
i need to get mine out before the track is closed up for the winter, i'm finally off weeknights and the first week the car was torn apart, last week we got to the track and they rained out about 10 minutes later, atleast it stayed clean in the trailer, tonight the weather sucks, i have next wednesday so it better be nice out or i wont be able to see what i've done with this combo 
Originally posted by carlover01
SnkSknrZ28 was that with the new setup you stuck in there?
what was your times?
SnkSknrZ28 was that with the new setup you stuck in there?
what was your times?
car has great street manners also 
Senior Member
Joined: Feb 2004
Posts: 860
Likes: 0
From: Albany, NY Area
Car: Red on Red 89 RS
Engine: LO3 305 TBI
Transmission: TH-700R4
Axle/Gears: 10-bolt / 2.73
To all those members with a stock size rear and weld wheels... What rear backspacing do you use?
I had a set of weld draglites that I bought used. Fronts were 15x4 and the rear was 15x8 with 10" slicks. They fit perfectly with no rubbing, and I dont remember what the offset of the wheel was.
-Jim
I had a set of weld draglites that I bought used. Fronts were 15x4 and the rear was 15x8 with 10" slicks. They fit perfectly with no rubbing, and I dont remember what the offset of the wheel was.
-Jim
Supreme Member
Joined: Oct 2002
Posts: 2,378
Likes: 0
From: Thornton colorado
Car: 91 Camaro RS
Engine: TBI
Transmission: 700r4
Originally posted by Tony89GTA
Our track closes down, supposebly they will run test and tunes un scheduled...ie a word of mouth thing through the fall when the wweathers good, problem is i have to go to the track straight from work so unless my lady meets me out there i wont have anyone to take pics
on my stock iroc rim which i belive is an 8inch rim with a 4inch offset i run a Mickey Thompson ET street 28x11.5-16, no rubbing or modifying at all, next season i plan on getting some Welds on there with Hoosier Quick Time Pros
Thread Starter
Joined: Jun 2002
Posts: 13,576
Likes: 30
From: Harford County, MD
Car: camaro sportcoupe
Engine: 7.0L
Transmission: G-Force GF5R
Axle/Gears: Moser 9"
for the welds question: 15x8's need a 4.5" backspacing and for 15x10's, you'll need a 5.5" backspacing.
Thread
Thread Starter
Forum
Replies
Last Post
82xCAMAROxZ28
Engine/Drivetrain/Suspension Parts for Sale
2
Sep 27, 2015 12:31 AM
