I read in a few posts and a few tech articles, but still can't the window sill rests on the inside to come off. I know you have to have the window down, and push up and out I think, but I did that and I was pushing as hard as I could and the damn things wouldn't budge. Any ideas? I need to remove it to put screw that rattled loose back on the exterior rest cause when I put my windows up it catches on it (the ext. rest) a little and pushes it up then lets it down real hard and it's driving me friggen insane!

 

if your standing inside the door, push down and in...

 

You have to take everything that's holding the door panel on off, like the arm rest, door trim, power door lock ect...

When I removed my door panels to replace them this article on my site helped a lot

http://www.3gc.net/articles/interior..._resto/2.shtml


------------------
3rd Generation Camaros


[This message has been edited by 3gc (edited July 19, 2001).]

 

It is a tremendous PITA to get the door panel off at the top. That website probably helps, but its still hard as hell