ATE PremiumOne Ceramic Disc Brake Pads
#1
Supreme Member
Thread Starter
ATE PremiumOne Ceramic Disc Brake Pads
I bought these AT AT749 ceramic pads when the new chassis hit the road 8 years ago. After 40 000 miles they're probably due for replacement.
https://www.rockauto.com/en/moreinfo...330355&jsn=251
For a weekend drive around (which is what this car has become lately) and no road course or auto cross in the immediate future, would these serve as a suitable replacement again?
I have no complaints about their performance or longevity. Or price for that matter. But I am open to alternatives. It may too that the ATE are unavailable.
Thanks
https://www.rockauto.com/en/moreinfo...330355&jsn=251
For a weekend drive around (which is what this car has become lately) and no road course or auto cross in the immediate future, would these serve as a suitable replacement again?
I have no complaints about their performance or longevity. Or price for that matter. But I am open to alternatives. It may too that the ATE are unavailable.
Thanks
#2
Supreme Member
Thread Starter
Re: ATE PremiumOne Ceramic Disc Brake Pads
What would the alternatives be anyway other than the garden variety stuff?
#4
Supreme Member
Thread Starter
Re: ATE PremiumOne Ceramic Disc Brake Pads
Checking out that link I see EBC offers a wide variety of pads. (Technically I'd be a 4th gen as I've swapped to the LS front and rear setup).
https://ebcbrakes.com/product/orange-stuff/
https://ebcbrakes.com/product/yellow...nd-track-pads/
https://ebcbrakes.com/product/redstuff-brake-pads/
All of the above are listed as suitable for street applications and also raceworthy.
Using EBC's calculator it seems that the Yellowstuff pads are recommended.
Fourth gen listings are provided for Red, Yellow and Bluestuff pads.
What else is out there?
Last edited by skinny z; 08-12-2018 at 12:13 PM.
Thread
Thread Starter
Forum
Replies
Last Post
383backinblack
Transmissions and Drivetrain
8
07-07-2018 11:30 AM
jrz28
Engine/Drivetrain/Suspension Parts for Sale
7
09-13-2011 05:43 PM
wwnf
Suspension and Chassis
12
06-27-2004 10:57 PM