[NC] 86 iroc pro street for sale
#1
86 iroc pro street for sale
1986 Camaro Pro-Touring IROCZ for Sale
Gen 1 350 with all new standard components; standard crank, rods, standard pistons, rings, bearings, cam and crank
Gen 1 350 with all new standard components; standard crank, rods, standard pistons, rings, bearings, cam and crank
- New HOWARD'S SBC Chevy Retro-Fit Hyd. Roller 270/278 495"/500" 108° Cam Camshaft Kit
- New Proform 66906C Stamped Roller-Tip Rocker Arm 1.5 Ratio 3/8 in. Stud Clamshell
- New Mighty Demon blow through 750
- New Eldebrock polished intake manifold
- New Elgin 1.94" Intake & 1.5" Exhaust Valve Set
- New Felpro gaskets
- New Electric water pump
- New Melling high volume oil pump with pick up
- New Acel HEI Dist.
- New MSD 6al2 programmable ign
- New Cloyes timing gear bearing for roller cam
- Ported and polished heads
- New plug wires
- New Holley 140 GPH electric fuel pump
- New Holley 4-9 PSI adjustable fuel pump reg with return port, boost referenced
- New Twin t-3/4 turbos
- New MSD Tach converter box
- Flowmaster Mufflers, Big Block II 70 Series, 2 1/2 in. Inlet/2 1/2 in. Outlet, Steel, Aluminized
- Corvette Fiberglass tail light panel and quad exhaust tips from C4
- Custom dash and all new gauges including boost and oil temp
- New door and window rubber molding
- Custom gear shifter for 700R4 transmission
- Electronic wireless exhausts cut-outs on both sides
- 4 New oversize Tires
- 4 wheel disc brakes
- New Front brakes
- Posi-traction 3:08 rear
- New Champion 3 row aluminum radiator
- Driver and passenger seat recovered
Last edited by coren; 09-18-2018 at 07:18 AM.
#3
Re: 86 iroc pro street for sale
When hot and accelerate hard, a little smoke. Think it is possible turbo issue, but engine has only 100 miles on it. My immediate plans are to diagnose and fix this, just haven't had time. If you are interested, I will make you a deal, only because I am spending all of my time on another project.
thanks
Oren Summer
thanks
Oren Summer
#5
Supreme Member
iTrader: (25)
Join Date: Sep 2005
Location: NJ
Posts: 1,814
Received 280 Likes
on
218 Posts
Car: 1987 IROC-Z
Engine: 406 on N20 w/ EFI
Transmission: P.B. 700R4
Axle/Gears: 12 bolt w/ 3.91
Re: 86 iroc pro street for sale
this is NOT "pro street" (as written in the title)
not tubbed, no fat rear tires, no roll cage, no wild paint, no extreme chassis work.
and it is NOT "pro-touring" either (as mentioned in the sub-title)
its just a custom build street car. sorry. had to say it
not tubbed, no fat rear tires, no roll cage, no wild paint, no extreme chassis work.
and it is NOT "pro-touring" either (as mentioned in the sub-title)
its just a custom build street car. sorry. had to say it
Thread
Thread Starter
Forum
Replies
Last Post
brando278705
Transmissions and Drivetrain
8
07-23-2013 03:53 AM
ZZ3Astro
Transmissions and Drivetrain
12
10-05-2010 09:31 AM
91Bird305
Transmissions and Drivetrain
6
03-04-2008 10:44 PM