Steeringwheel control to aftermarket radio
08-02-2017, 08:20 AM
#1
Junior Member
Thread Starter
Join Date: Oct 2014
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Steeringwheel control to aftermarket radio
Hi.
Been reading and reading about how to get my factory steeringwheel controls to work in my -88 T/A GTA with an aftermarket radio. Finally got around to buy a PAC-X control and connected it, that didnt work out as i hoped...
The problem i have is that i got 12V on the yellow cable, i got 10,7 volt on grey with lights on but only 0,45V on the orange and it should be 4,7V. Cant find any threads that have the same issue so if anyone got any ideas im grateful.
RGDS // Micke
Been reading and reading about how to get my factory steeringwheel controls to work in my -88 T/A GTA with an aftermarket radio. Finally got around to buy a PAC-X control and connected it, that didnt work out as i hoped...
The problem i have is that i got 12V on the yellow cable, i got 10,7 volt on grey with lights on but only 0,45V on the orange and it should be 4,7V. Cant find any threads that have the same issue so if anyone got any ideas im grateful.RGDS // Micke
08-20-2017, 09:24 AM
#2
Junior Member
Join Date: Jun 2017
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
Re: Steeringwheel control to aftermarket radio
Hey man....from what I've read that column will only work
With the factory stock radio....
What type of head unit are you installing.....??
Also how does the PAC-X work....??
With the factory stock radio....
What type of head unit are you installing.....??
Also how does the PAC-X work....??
08-22-2017, 01:04 AM
#3
Junior Member
Join Date: Aug 2017
Location: Warren, AR
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 GTA Trans Am
Engine: 5.7L L98
Transmission: 700R4
Axle/Gears: Factory 10 bolt with Stock Gears
Re: Steeringwheel control to aftermarket radio
What the other guy said.