OBD1 Code Help?
#1
OBD1 Code Help?
So, I recently got a pair of Pacesetter headers installed on my 1989 2.8 RS. I diagnosed the error code and received 'Error 32', it talks about the Barometric Pressure Switch and the EGR, but it doesn't really tell me what to fix.
Anyone have any experience with this issue? What can I do to fix it? I hate seeing that darn Check Engine light.
Anyone have any experience with this issue? What can I do to fix it? I hate seeing that darn Check Engine light.
#2
Moderator
iTrader: (1)
Join Date: Mar 2002
Location: Chasing Electrons
Posts: 18,401
Likes: 0
Received 215 Likes
on
201 Posts
Car: check
Engine: check
Transmission: check
Re: OBD1 Code Help?
Does the Pacesetter headers have the EGR stalk to mount it? GM tests the EGR function is various ways, not sure how they did it on the '89 MPFI model.
RBob.
RBob.
#3
Re: OBD1 Code Help?
Yes it does, adjacent to the passenger side head. Very readily accessible. Do you think I just need to replace it along with the gasket?
#5
Re: OBD1 Code Help?
Never once had a check engine light before the headers were installed. I've since discovered in the meantime that they broke my oil sensor and cracked my power steering bracket, so I'm not surprised this is having an issue as well.
Strangely, it's not a consistent issue. Sometimes it doesn't happen, other times it turns on right away.
Strangely, it's not a consistent issue. Sometimes it doesn't happen, other times it turns on right away.
#6
#7
Moderator
iTrader: (1)
Join Date: Mar 2002
Location: Chasing Electrons
Posts: 18,401
Likes: 0
Received 215 Likes
on
201 Posts
Car: check
Engine: check
Transmission: check
Re: OBD1 Code Help?
Your thread on the V6 board here shows that the EGR solenoid doesn't have the vacuum line connected to it. Fix that and the code will likely go away. Easy fix.
RBob.
RBob.