well guys im triyng to get winaldl to run so i can start data logging my blazer to get a chip made.

the only way i can get it to do anyhting is to set the configs to US and baud to 4800. its set for a (7747/8062 ecu for my 89 chevy blazer) with this it reads raw data and give me all sensor data. but when i go to log BLM's it just has a romaing green box with no text. on the main window i get a flashing green box at the top with the number 20 in it to the left of configuration button

i was talking to a buddy adn if i set it to his configs the program only spits out 3 lines of raw data mw2, promida, promidb and i have a roaming green box still in blm's o2 spark and so on. under configurations its set to metric and 2400baud everything else is not touched. with it set like this i get a red flashing box next to configs with a 3 in it. this setup works flawlessly for my buddie, not sure why it wont work for me

id like to get this working so i can get my truck running a little better

thanks in advance for any help. if there is something you need me to clarify or something let me know

-mark

 

just swapped in my 7747 and im still having the same issues

 

i think i figured it out, my motor wasnt in closed loop.

im gonna let it runa dn get in closed loop and see what happens