Radiator Fan Temp Guage replacement
Thread Starter
Joined: Dec 2005
Posts: 4,796
Likes: 16
From: St. Cloud, MN
Car: 1984 Trans Am
Engine: LS1383 in work
Transmission: Magnum F - to be installed
Axle/Gears: Zexel Torsen 3.73, 28-spline mosers
Radiator Fan Temp Guage replacement
Hey guys,
I want to replace my stock fan sensor in my 84 Trans Am (the one that tells the radiator fan to turn on and off) with one that starts at a little lower temperature. The problem is, not sure where this sensor is. Any help would be greatly appreciated. Is it coming out between the number 1 and 3 cylinders?
I want to replace my stock fan sensor in my 84 Trans Am (the one that tells the radiator fan to turn on and off) with one that starts at a little lower temperature. The problem is, not sure where this sensor is. Any help would be greatly appreciated. Is it coming out between the number 1 and 3 cylinders?
Member
Joined: May 2006
Posts: 115
Likes: 0
From: colorado
Car: 85 Trans Am
Engine: 383 ci
Transmission: 700R4
Axle/Gears: posi 342
The sensor between 1 & 3 cylinder is for the temp guage. The sensor you are talking about is between cylinders 6 & 8. Their should be a green wire coming out of it. If you ground the wire while it is still connected to sensor w/ignition on the rad fan should engage.
Thread
Thread Starter
Forum
Replies
Last Post
eightsixseven
Tech / General Engine
2
Dec 16, 2024 01:50 PM
ambainb
Camaros for Sale
11
Apr 25, 2016 09:21 PM