I am in the process of converting from a 2.8 to a 350 in an 89 RS.
I bought the car not running and many of the wires were hacked up so i dont know what most are
The computer is gone and the motor has already been fired up so i have the basics figured out.
Can anyone identify the items listed in the pictures below so i know how to go about deleting or hooking them up. Just refer to a picture number and what is shown.
Hoping to get this drivable tomorrow night so any help would be appreciated.

Picture #1 Passanger side behind the radiator overflow.


Picture #2 Drivers side next to brake booster.


Picture #3 Passanger side by heater fan.


Picture #4 Drivers side front near steering box.


Picture #5 Drivers side near brake booster.

 

Picture #6 Passangers side front laying by battery tray.

 

#1 - If it's the small black box with red wires that you're looking at, it's the ECM and F/P fuse. Needed to run the engine.

#2 - F/P relay. Needed to run the engine.

#3 - High-speed blower relay - needed for the highest blower speed.

#4 - Can't tell. Where do the wires go.

#5 - A generic GM relay. If you tell me the wire colors, I can tell you what it does.

#6 - Another generic GM relay. Can't tell very well the wire colors, would need a close-up or wire color decription.

Hope this helps at least partially.
Lou