speedometer not working after engine swap
Thread Starter
Junior Member
Joined: Jun 2009
Posts: 35
Likes: 0
speedometer not working after engine swap
didn't know where to post this so if this is not the right place feel free to move it.
i have done numerous searches but did not come up with a good answer so i was hoping some of you could help me
i have a 92 rs and i replaced the TBI 305 with a carbed 350 and everything is working except the electronic speedometer. does the ecu have anything to do with the speedometer and if so what can be done to make it work without the ecu.
i have read on here about several people switching to carb and eliminating the ecu.
any help is appreciated
i have done numerous searches but did not come up with a good answer so i was hoping some of you could help me
i have a 92 rs and i replaced the TBI 305 with a carbed 350 and everything is working except the electronic speedometer. does the ecu have anything to do with the speedometer and if so what can be done to make it work without the ecu.
i have read on here about several people switching to carb and eliminating the ecu.
any help is appreciated
Moderator
Joined: Jan 2000
Posts: 20,981
Likes: 11
From: Mercedes Norte, Heredia, Costa Rica
Car: 1984 Z28 Hardtop
Engine: 383 Carb
Transmission: 4L60
Axle/Gears: 3.54 Dana 44
Re: speedometer not working after engine swap
The ECM doesn't, but the VSS in the tranmission does. You didn't cut any wiring, did you?
Thread
Thread Starter
Forum
Replies
Last Post
theshackle
Tech / General Engine
4
Mar 5, 2017 06:37 PM
