Can not get plug off...
Thread Starter
Junior Member
Joined: Nov 2012
Posts: 54
Likes: 0
From: Camp Lejune, NC
Car: 92 Camaro RS
Engine: 305 Tbi
Transmission: T-5
Can not get plug off...
92 camaro rs, 305 tbi, t5,...
Im doing a carbed 350 swap now, and ive got the engine harness to the point where i need to unplug it on the driver side and i can not for the life of me get it to come apart. Am i over thinking this? Any secrets?
Im doing a carbed 350 swap now, and ive got the engine harness to the point where i need to unplug it on the driver side and i can not for the life of me get it to come apart. Am i over thinking this? Any secrets?
Joined: Dec 2004
Posts: 16,916
Likes: 1,016
From: Mile High Country !!!
Car: 1967 Camaro, 91 z28
Engine: Lb9
Transmission: M20
Axle/Gears: J65 pbr on stock posi 10bolt
Re: Can not get plug off...
The body pass through connector ? It has a u shaped clip that slides off the connecter on the inside of the car.
Joined: Dec 2004
Posts: 16,916
Likes: 1,016
From: Mile High Country !!!
Car: 1967 Camaro, 91 z28
Engine: Lb9
Transmission: M20
Axle/Gears: J65 pbr on stock posi 10bolt
Re: Can not get plug off...
Oh yeh duh c100
Last edited by Tuned Performance; Apr 7, 2013 at 09:14 PM.
Supreme Member
iTrader: (9)
Joined: Sep 1999
Posts: 3,871
Likes: 24
From: Mass
Engine: 350 TPI
Transmission: A4
Axle/Gears: 3.23
Re: Can not get plug off...
The bolt most likely is hidden behind years of gunk. The wiring may have to be moved slightly to get a deep socket on an extension in there to get the bolt loose.
Thread
Thread Starter
Forum
Replies
Last Post
wigmobile
Electronics
5
Feb 26, 2025 02:56 PM
89 formula TPI
Tech / General Engine
10
Sep 7, 2015 11:06 AM