Hello,

I just arrived back from vacation, ready to troubleshoot some of my Camaros issues... Of course when I hook up my new ALDL scanner, all the codes I had before aren't showing up, as is typical with my luck.

What I do have now, is a log file of my engine running, which is the first time I am seeing it. Pretty cool hardware and application...

Anyways, I am a complete noob and cannot make heads or tails on how things SHOULD look. I have the file here if someone would be willing to take a look with me...

The codes I was originally reading, after replacing my O2 Sensor were codes 32 and 33.

The story goes, I had a sleuth of codes soon as I got my car running again after 3 years, I replace the O2 Sensor, it drives great for the day, though I thought I felt a loss of power, could be me forgetting how it felt at its best.

The next day I get codes 32 and 33. She's suddenly super sluggish and nearly stalls out while accelerating. I try the next day, similar results, checking all visible grounds and vacuums.

3 years ago, before I put my car out of commission, we had just replaced the EGR valve and replaced the manifold gaskets. I surely hope the EGR is not giving me any more issues.

I received my scanner just before vacation, and of course the codes are not appearing today.

I am going to do a pressurization test later today, and I am going to clean out the MAF with some contact cleaner...

Could we tell whats wrong from this data? Anything else I should trouble shoot? For reference I took her for a spin around line 336 on the spreadsheet.


Thanks in advance!

 

For a bit of ease, I have added a picture of the GUI on the app itself.

I just finished spraying down the MAF with some cleaner, and this is where I am at.