Digital dash
Thread Starter
Member
Joined: Jan 2003
Posts: 464
Likes: 23
From: Long Island N.Y
Car: 1988 Pontiac GTA
Engine: 5.7 l98
Transmission: 700r4
Axle/Gears: BW 9bolt with torsen carrier
Digital dash
Just got car back from New motor and holly computer being installed, my digital dash is Now not working can anyone point me in the right direction on what and where to look at everything is hooked up to my original gauges. The info check is working just nothing else
Last edited by george88gta; Mar 28, 2026 at 05:09 PM.
Supreme Member
Joined: Apr 2010
Posts: 1,200
Likes: 126
From: Armstrong B.C.
Car: 1991 camaro Z28
Engine: Forged 370" LS turbo s488
Transmission: Built 4L80e FTI converter
Axle/Gears: MWC 9" 35 spline 3.25 gears
Re: Digital dash
If you're running stock digital gauges with a Holley system they most likely won't work at all. You'll either need to figure out a workaround or total aftermarket
Thread Starter
Member
Joined: Jan 2003
Posts: 464
Likes: 23
From: Long Island N.Y
Car: 1988 Pontiac GTA
Engine: 5.7 l98
Transmission: 700r4
Axle/Gears: BW 9bolt with torsen carrier
Re: Digital dash
I'm looking for info on the workaround I would like to keep stock digital gauges, hoping someone in here has done it and can lead me in the right direction
Supreme Member
Joined: Apr 2010
Posts: 1,200
Likes: 126
From: Armstrong B.C.
Car: 1991 camaro Z28
Engine: Forged 370" LS turbo s488
Transmission: Built 4L80e FTI converter
Axle/Gears: MWC 9" 35 spline 3.25 gears
Re: Digital dash
Thread Starter
Member
Joined: Jan 2003
Posts: 464
Likes: 23
From: Long Island N.Y
Car: 1988 Pontiac GTA
Engine: 5.7 l98
Transmission: 700r4
Axle/Gears: BW 9bolt with torsen carrier
Thread
Thread Starter
Forum
Replies
Last Post