L98, Corvette aluminum L98 heads, TPI setup
05-26-2006, 08:47 PM
#1
TGO Supporter/Moderator
Thread Starter
iTrader: (12)
Join Date: Jul 1999
Location: SALEM, NH
Posts: 11,723
Likes: 0
Received 89 Likes
on
75 Posts
Car: '88 Formula, '94 Corvette, '95 Bird
Engine: LC9, 355" LT1, LT1
Transmission: T5, Zf6, 4L60E
Axle/Gears: 3.42, Dana44 3.45, 3.23
L98, Corvette aluminum L98 heads, TPI setup
Out of my Corvette, since I'm gonna be dropping my 358 in soon. (revised pricing)
L98 Short block, mi unknown (rebuilt, but dont know when), Doesn't smoke, 60-65psi oil pressure cold, about 45psi hot (at idle). Will come with an fbody oil pan (i need the vette pan for my car). $300 or best offer
L98 Aluminum corvette heads. Don't puff or smoke or anything like that. Car pulls great in stock form. $400 or best offer
without valve covers, $500 with.
TPI Setup from the same corvette. cast type corvette runners, baseplate, fuel rails, 350 (22lbs) injectors. plenum, throttle body. Aftermarket adjustable fuel pressure regulator, and an aftermarket airfoil. $300 or best offer.
PM me if interested!!
P.s, the motor is still together and in the car. I will entertain offer on the whole pkg. If you wanna swing by and take a ride with me in the vette you can see how it runs. I'll be yanking the motor in about a week
Prices do not include shipping.
-- Joe
L98 Short block, mi unknown (rebuilt, but dont know when), Doesn't smoke, 60-65psi oil pressure cold, about 45psi hot (at idle). Will come with an fbody oil pan (i need the vette pan for my car). $300 or best offer
L98 Aluminum corvette heads. Don't puff or smoke or anything like that. Car pulls great in stock form. $400 or best offer
without valve covers, $500 with.
TPI Setup from the same corvette. cast type corvette runners, baseplate, fuel rails, 350 (22lbs) injectors. plenum, throttle body. Aftermarket adjustable fuel pressure regulator, and an aftermarket airfoil. $300 or best offer.
PM me if interested!!
P.s, the motor is still together and in the car. I will entertain offer on the whole pkg. If you wanna swing by and take a ride with me in the vette you can see how it runs. I'll be yanking the motor in about a week
Prices do not include shipping.
-- Joe
Last edited by anesthes; 06-01-2006 at 01:42 PM.
05-26-2006, 08:54 PM
#2
Junior Member
Join Date: May 2006
Location: SanDiego/Tucson
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91z28tpil98
Engine: 350
Transmission: 700r
Axle/Gears: 3.23
Originally Posted by anesthes
Out of my Corvette, since I'm gonna be dropping my 358 in soon.
L98 Short block, mi unknown (rebuilt, but dont know when), Doesn't smoke, 60-65psi oil pressure cold, about 45psi hot (at idle). Will come with an fbody oil pan (i need the vette pan for my car). $500 or best offer
L98 Aluminum corvette heads. Don't puff or smoke or anything like that. Car pulls great in stock form. $400 or best offer
TPI Setup from the same corvette. cast type corvette runners, baseplate, fuel rails, 350 (22lbs) injectors, and plenum. I need the TB for now, unless someone will give me a deal on a 52 or 58mm, so thats not included. $400 or best offer.
PM me if interested!!
P.s, the motor is still together and in the car. I will entertain offer on the whole pkg. If you wanna swing by and take a ride with me in the vette you can see how it runs. I'll be yanking the motor in about 3 weeks.
-- Joe
L98 Short block, mi unknown (rebuilt, but dont know when), Doesn't smoke, 60-65psi oil pressure cold, about 45psi hot (at idle). Will come with an fbody oil pan (i need the vette pan for my car). $500 or best offer
L98 Aluminum corvette heads. Don't puff or smoke or anything like that. Car pulls great in stock form. $400 or best offer
TPI Setup from the same corvette. cast type corvette runners, baseplate, fuel rails, 350 (22lbs) injectors, and plenum. I need the TB for now, unless someone will give me a deal on a 52 or 58mm, so thats not included. $400 or best offer.
PM me if interested!!
P.s, the motor is still together and in the car. I will entertain offer on the whole pkg. If you wanna swing by and take a ride with me in the vette you can see how it runs. I'll be yanking the motor in about 3 weeks.
-- Joe
05-26-2006, 09:12 PM
#3
TGO Supporter/Moderator
Thread Starter
iTrader: (12)
Join Date: Jul 1999
Location: SALEM, NH
Posts: 11,723
Likes: 0
Received 89 Likes
on
75 Posts
Car: '88 Formula, '94 Corvette, '95 Bird
Engine: LC9, 355" LT1, LT1
Transmission: T5, Zf6, 4L60E
Axle/Gears: 3.42, Dana44 3.45, 3.23
Originally Posted by irocznickv8
400 for all of it the tpi set up and the heads???
05-26-2006, 10:28 PM
#4
Supreme Member
iTrader: (1)
Join Date: Mar 2001
Location: In the corner of my mind!
Posts: 1,100
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 TTA #1240
Engine: 3.8 SFI turbo
Transmission: 2004r
Axle/Gears: 3.27
I'll take the heads for $400 shipped to NJ, pm me with your paypal info......
Shipping should be around $20/ea. if boxed seperately.....
Thanx
Pete
Shipping should be around $20/ea. if boxed seperately.....
Thanx
Pete
Last edited by PETE; 05-27-2006 at 07:31 AM.
05-27-2006, 12:47 PM
#6
TGO Supporter/Moderator
Thread Starter
iTrader: (12)
Join Date: Jul 1999
Location: SALEM, NH
Posts: 11,723
Likes: 0
Received 89 Likes
on
75 Posts
Car: '88 Formula, '94 Corvette, '95 Bird
Engine: LC9, 355" LT1, LT1
Transmission: T5, Zf6, 4L60E
Axle/Gears: 3.42, Dana44 3.45, 3.23
Originally Posted by PETE
I'll take the heads for $400 shipped to NJ, pm me with your paypal info......
Shipping should be around $20/ea. if boxed seperately.....
Thanx
Pete
Shipping should be around $20/ea. if boxed seperately.....
Thanx
Pete
-- Joe
Trending Topics
05-31-2006, 07:33 AM
#8
TGO Supporter/Moderator
Thread Starter
iTrader: (12)
Join Date: Jul 1999
Location: SALEM, NH
Posts: 11,723
Likes: 0
Received 89 Likes
on
75 Posts
Car: '88 Formula, '94 Corvette, '95 Bird
Engine: LC9, 355" LT1, LT1
Transmission: T5, Zf6, 4L60E
Axle/Gears: 3.42, Dana44 3.45, 3.23
pete needs a larger chamber head. TTT one more time, then ebay.
-- Joe
-- Joe
05-31-2006, 06:19 PM
#11
TGO Supporter/Moderator
Thread Starter
iTrader: (12)
Join Date: Jul 1999
Location: SALEM, NH
Posts: 11,723
Likes: 0
Received 89 Likes
on
75 Posts
Car: '88 Formula, '94 Corvette, '95 Bird
Engine: LC9, 355" LT1, LT1
Transmission: T5, Zf6, 4L60E
Axle/Gears: 3.42, Dana44 3.45, 3.23
Originally Posted by Phatfiddler
Received my Cold Air Intake today, looks awesome! Thanks..
-John
-John
-- Joe
05-31-2006, 10:09 PM
#13
TGO Supporter/Moderator
Thread Starter
iTrader: (12)
Join Date: Jul 1999
Location: SALEM, NH
Posts: 11,723
Likes: 0
Received 89 Likes
on
75 Posts
Car: '88 Formula, '94 Corvette, '95 Bird
Engine: LC9, 355" LT1, LT1
Transmission: T5, Zf6, 4L60E
Axle/Gears: 3.42, Dana44 3.45, 3.23
Originally Posted by RamAirZ
Do you still have the heads?
-- Joe
09-25-2006, 07:43 PM
#15
Member
iTrader: (1)
Join Date: Jul 2006
Location: Baltimore, MD.
Posts: 194
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1967 Camaro
Engine: 327
Transmission: Turbo 350
Axle/Gears: 308's
Joe, put me in line for the heads too.
If it gets to me, PM me or shoot me an email please...
rel3rd@comcast.net
Thanks, Bob
If it gets to me, PM me or shoot me an email please...
rel3rd@comcast.net
Thanks, Bob
Thread
Thread Starter
Forum
Replies
Last Post
Sanjay
Engine/Drivetrain/Suspension Parts for Sale
1
08-12-2015 03:41 PM