PARTS for sale Trickflow heads
02-16-2010, 03:32 AM
#1
Senior Member
Thread Starter
Join Date: Jul 2000
Location: NJ
Posts: 568
Likes: 0
Received 1 Like
on
1 Post
Car: 89 formula
Engine: 383
Transmission: 700R4
PARTS for sale Trickflow heads
TFS-30400002 SBC heads $800-----now---$600-----sold
holley stealth carb intake 8016 $50
crane blazer roller rockers 1.6 $100----------sold
comp roller cam 8-302-08 $150
stock 89 350 TPI roller cam $50
GM HOT roller cam $100-------------sold
Accell 300+ ignition $100
Accell 24lbs. injectors $100----------sold
stock 89 350 TPI heads $75 --------SOLD
holley TPI adj fuel reg 512-501 $50
edelbrock 1411 carb W/jet kit $150
Global west wonder bar $25
fuel rail fitting adapter(for braided hose)$15
stock TPI T-body W/air foil $50
B&M trans govner calibration kit 26248 $10 (missing 1 spring & 1 weight)
stock CC 89 distributer $50
jegs jegster driveshaft loop 82-95 $25 new
2 eastern high flow cats no air tubes $50 new
B&M percision shift gate 82-92 PN-81071 $25 new----------sold
summit spark plug wires blue pn-868836 $25 new-----------sold
crane adjustable HEI vac advance kit $20 new (missing 2 springs)
my zip code is 07416
holley stealth carb intake 8016 $50
crane blazer roller rockers 1.6 $100----------sold
comp roller cam 8-302-08 $150
stock 89 350 TPI roller cam $50
GM HOT roller cam $100-------------sold
Accell 300+ ignition $100
Accell 24lbs. injectors $100----------sold
stock 89 350 TPI heads $75 --------SOLD
holley TPI adj fuel reg 512-501 $50
edelbrock 1411 carb W/jet kit $150
Global west wonder bar $25
fuel rail fitting adapter(for braided hose)$15
stock TPI T-body W/air foil $50
B&M trans govner calibration kit 26248 $10 (missing 1 spring & 1 weight)
stock CC 89 distributer $50
jegs jegster driveshaft loop 82-95 $25 new
2 eastern high flow cats no air tubes $50 new
B&M percision shift gate 82-92 PN-81071 $25 new----------sold
summit spark plug wires blue pn-868836 $25 new-----------sold
crane adjustable HEI vac advance kit $20 new (missing 2 springs)
my zip code is 07416
Last edited by e-man; 07-11-2010 at 07:59 AM.
02-16-2010, 08:05 AM
#2
Senior Member
iTrader: (10)
Join Date: Aug 2008
Location: Winchester, VA
Posts: 638
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Camaro RS/1989 Vert RS
Engine: 355/350
Transmission: T-5/T-5
Axle/Gears: BW9bolt3.45posi/3.23 Posi
Re: PARTS for sale Trickflow heads
Someones gonna ask so I thought I would save you the stress :P
http://www.trickflow.com/partdetail....t=TFS-30400002
http://www.trickflow.com/partdetail....t=TFS-30400002
02-18-2010, 05:42 PM
#7
Senior Member
Thread Starter
Join Date: Jul 2000
Location: NJ
Posts: 568
Likes: 0
Received 1 Like
on
1 Post
Car: 89 formula
Engine: 383
Transmission: 700R4
Re: PARTS for sale Trickflow heads
the only thing wrong with the heads is there is some pitting on the heads where the stock block water holes are blocked not needed
Trending Topics
02-19-2010, 09:06 PM
#8
Junior Member
iTrader: (3)
Join Date: Aug 2008
Location: the big ol nc
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
Car: 88 t/a tpi ported polished bolt ons
Engine: lb9 got 406 on paymnt wow FI 406
Transmission: 700r4
Axle/Gears: 99 z28 342 in back
Re: PARTS for sale Trickflow heads
i sure wish u shipped good luck wth ur sell
03-16-2010, 06:45 PM
#13
Senior Member
Thread Starter
Join Date: Jul 2000
Location: NJ
Posts: 568
Likes: 0
Received 1 Like
on
1 Post
Car: 89 formula
Engine: 383
Transmission: 700R4
Re: PARTS for sale Trickflow heads
the trickflows are now $600 also going to sell my 383 short block
Last edited by e-man; 03-16-2010 at 06:46 PM. Reason: adding
03-21-2010, 12:07 PM
#16
Senior Member
Thread Starter
Join Date: Jul 2000
Location: NJ
Posts: 568
Likes: 0
Received 1 Like
on
1 Post
Car: 89 formula
Engine: 383
Transmission: 700R4
Re: PARTS for sale Trickflow heads
now selling the block used 383 short block scat 9000 crank,scat PRO COMP 4340 Forged I-Beam Rods,speedpro pistons 10.34cr with 64cc heads,block is a factory roller block.motor has about 7000 miles on it has been sitting for 4 years
03-23-2010, 12:32 AM
#17
Member
iTrader: (3)
Join Date: Jan 2003
Location: everywhere
Posts: 310
Likes: 0
Received 0 Likes
on
0 Posts
Re: PARTS for sale Trickflow heads
I'm in NJ and very interested!
No shipping needed here!
How much better do the heads flow the stock vette heads?
What springs are on there?
No shipping needed here!
How much better do the heads flow the stock vette heads?
What springs are on there?
03-23-2010, 03:42 AM
#18
Senior Member
Thread Starter
Join Date: Jul 2000
Location: NJ
Posts: 568
Likes: 0
Received 1 Like
on
1 Post
Car: 89 formula
Engine: 383
Transmission: 700R4
Re: PARTS for sale Trickflow heads
they flow about 70cfm on the intake and 15cfm on the exhust.the springs are 1.470 in.Dia good for .54http://www.hotrod.com/techarticles/engine/hrdp_0902_small_block_chevy_bolt_ons/zz4_cylinder_heads.html0 lift
03-24-2010, 07:20 PM
#21
Junior Member
Join Date: Oct 2009
Location: Lexington, VA
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Camaro Z28
Engine: Carb 5.3
Transmission: Th350
Axle/Gears: Moser 12 bolt, 4.11 gears
Re: PARTS for sale Trickflow heads
is the short block a 1 0r 2 piece rear main seal, 2 0r 4 bolt main caps, and how much
07-11-2010, 05:56 PM
#25
Junior Member
iTrader: (2)
Join Date: Nov 2007
Location: ottawa Ontario
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 z28
Engine: 5.7l TPI
Transmission: 700r4
Axle/Gears: 3.73
Re: PARTS for sale Trickflow heads
could you send me a picture of the f
uel rail fitting adapter(for braided hose)
uel rail fitting adapter(for braided hose)
Thread
Thread Starter
Forum
Replies
Last Post
