[Sold] Comp magnum rockers with pushrods and polylocks
#1
Supreme Member
Thread Starter
iTrader: (2)
Join Date: Jan 2002
Location: Moorestown, NJ
Posts: 9,962
Likes: 0
Received 3 Likes
on
3 Posts
Car: 88 Camaro SC
Engine: SFI'd 350
Transmission: TKO 500
Axle/Gears: 9-bolt w/ 3.23's
Comp magnum rockers with pushrods and polylocks
This is a set of used, but in very good condition Comp-Cams magnum rocker arms (non-SA) with about 10k miles. They are 1.52 ratio with roller tips. The fulcrum, fulcrum *****, pushrod seats, and pushrods are all in good shape with no scoring. These are a good upgrade over the crappy stock stamped rockers.
The pushrods are also either stock roller 7.200" (Comp Magnums) or flat tappet 7.800" (Isky). Both are used, but in good shape. Both sets are chrome-moly steel and hardened for use with guide-plates. Specify which you want, and Ill put the specific set in.
Ill sell them (rockers + polylocks + set of applicable pushrods) for $35 + shipping/handling (your choice of shipping method). Payment via paypal. PM if interested.
The pushrods are also either stock roller 7.200" (Comp Magnums) or flat tappet 7.800" (Isky). Both are used, but in good shape. Both sets are chrome-moly steel and hardened for use with guide-plates. Specify which you want, and Ill put the specific set in.
Ill sell them (rockers + polylocks + set of applicable pushrods) for $35 + shipping/handling (your choice of shipping method). Payment via paypal. PM if interested.
Last edited by dimented24x7; 12-09-2011 at 01:50 AM.
#3
Member
iTrader: (3)
Join Date: Feb 2003
Location: Bealeton, Virginia, 22712,USA
Posts: 272
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 L98 Z28 Heritage Hard Top
Engine: L98 350 w/ HSR,24lbs inj,AFPR
Transmission: TCI Super Street Fighter W/3300 sta
Axle/Gears: 3.73 Detriot NoSpin,LPW cover
Re: Comp magnum rockers with pushrods and polylocks
Shipping to 20119,
#4
Supreme Member
Thread Starter
iTrader: (2)
Join Date: Jan 2002
Location: Moorestown, NJ
Posts: 9,962
Likes: 0
Received 3 Likes
on
3 Posts
Car: 88 Camaro SC
Engine: SFI'd 350
Transmission: TKO 500
Axle/Gears: 9-bolt w/ 3.23's
Re: Comp magnum rockers with pushrods and polylocks
$10 via USPS, if USPS is good with you. It'll ship via a flat-rate box with appropriate accomodations so it all gets there in one piece. This is a roller cam engine with guide plates/slots, right?
Last edited by dimented24x7; 11-12-2011 at 02:22 AM.
#5
Member
iTrader: (3)
Join Date: Feb 2003
Location: Bealeton, Virginia, 22712,USA
Posts: 272
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 L98 Z28 Heritage Hard Top
Engine: L98 350 w/ HSR,24lbs inj,AFPR
Transmission: TCI Super Street Fighter W/3300 sta
Axle/Gears: 3.73 Detriot NoSpin,LPW cover
Re: Comp magnum rockers with pushrods and polylocks
It's a stock 92 L98 with a hot cam, but I am looking to upgrade to aluminum heads when I get my tax money
#7
Supreme Member
Thread Starter
iTrader: (2)
Join Date: Jan 2002
Location: Moorestown, NJ
Posts: 9,962
Likes: 0
Received 3 Likes
on
3 Posts
Car: 88 Camaro SC
Engine: SFI'd 350
Transmission: TKO 500
Axle/Gears: 9-bolt w/ 3.23's
Re: Comp magnum rockers with pushrods and polylocks
ScottyRock, I assume you want them, then? If so, PM me and we'll take it from there.
Harcourt, if he passes, Ill sell them to you.
Harcourt, if he passes, Ill sell them to you.
Trending Topics
#9
Member
iTrader: (3)
Join Date: Feb 2003
Location: Bealeton, Virginia, 22712,USA
Posts: 272
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 L98 Z28 Heritage Hard Top
Engine: L98 350 w/ HSR,24lbs inj,AFPR
Transmission: TCI Super Street Fighter W/3300 sta
Axle/Gears: 3.73 Detriot NoSpin,LPW cover
Re: Comp magnum rockers with pushrods and polylocks
Going to pass, found a set of magnum rollers local
#10
Junior Member
Join Date: Mar 2011
Location: Grizzly Flats, CA
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 Camaro, IROC springs & bars
Engine: Mild 350,Q-jet,headers
Transmission: M-21, 12#flywheel
Axle/Gears: 98 7.5, 3.73 torsen.
Re: Comp magnum rockers with pushrods and polylocks
If the rockers & the 7.2" pushrods are still available I'll take them. I'm building a cheap 350 to run in the 24 hours of Lemons & these are what I still need. Call me if you want, I'm not much of a computer guy. 530-642-9563. Thanks.
#11
Supreme Member
Thread Starter
iTrader: (2)
Join Date: Jan 2002
Location: Moorestown, NJ
Posts: 9,962
Likes: 0
Received 3 Likes
on
3 Posts
Car: 88 Camaro SC
Engine: SFI'd 350
Transmission: TKO 500
Axle/Gears: 9-bolt w/ 3.23's
Re: Comp magnum rockers with pushrods and polylocks
Thanks for the interest, but these where sold already to one of the earlier posters.
Thread
Thread Starter
Forum
Replies
Last Post
no green
Engine/Drivetrain/Suspension Parts for Sale
11
01-09-2016 09:22 PM