WTS ALUMINUM 9" 3rd member 31 spline locker you pick gears $900
05-22-2017, 08:49 PM
#1
WTS ALUMINUM 9" 3rd member 31 spline locker you pick gears $900
on a side note: I have all the small parts left over to do a 3rd aluminum housing.
like in the pic below.. in a gear ratio of your choice and 31 spline locker for say $900..(that's cheap) will list it...if anyone is looking
all new parts
timkin bearings
U.S.made gears
locker 3.25 bearings
alum hosing 3.25 bearing
Daytona support (black)
arp bolts
to buy this would be over $1000 in just parts..
1330 long yoke fast shaft maker or 1350 forged chromoly short or long yoke. all new parts
like in the pic below.. in a gear ratio of your choice and 31 spline locker for say $900..(that's cheap) will list it...if anyone is looking
all new parts
timkin bearings
U.S.made gears
locker 3.25 bearings
alum hosing 3.25 bearing
Daytona support (black)
arp bolts
to buy this would be over $1000 in just parts..
1330 long yoke fast shaft maker or 1350 forged chromoly short or long yoke. all new parts
Last edited by articwhiteZ; 08-03-2017 at 07:18 PM.
05-23-2017, 09:34 PM
#3
Re: WTS ALUMINUM 9" 3rd member 31 spline locker you pick gears $880
the 35 spine would be $170 to $189 more..
them 35 spline lockers are not cheap.
if you have ever picked up a cast iron 3rd member..and picked up a aluminum 3rd member..you would never want a iron unit in you car ever again..
them 35 spline lockers are not cheap.
if you have ever picked up a cast iron 3rd member..and picked up a aluminum 3rd member..you would never want a iron unit in you car ever again..
Last edited by articwhiteZ; 05-23-2017 at 09:45 PM.
05-24-2017, 10:24 PM
#5
Re: WTS ALUMINUM 9" 3rd member 31 spline locker you pick gears $880
can do another 9"aluminum 3rd member..31 spline Detroit locker. 3.25 bearings (the big ones) billet yoke 1350 or forged steel 1330 yoke.. you put it together all new parts $900.. $1100 assembled..
or if ya like ya can buy the Detroit locker 31 spline $250 shipped
all the small parts to bolt it together. bearings. bolts. shims..housing..yoke.. just ask..
or if ya like ya can buy the Detroit locker 31 spline $250 shipped
all the small parts to bolt it together. bearings. bolts. shims..housing..yoke.. just ask..
Last edited by articwhiteZ; 08-03-2017 at 07:22 PM.
Trending Topics
08-04-2017, 12:03 PM
#8
Supreme Member
iTrader: (8)
Join Date: Oct 2001
Location: Il
Posts: 11,688
Received 745 Likes
on
505 Posts
Car: 1989-92 FORMULA350 305 92 Hawkclone
Engine: 4++,350 & 305 CIs
Transmission: 700R4 4800 vig 18th700R4 t56 ZF6 T5
Axle/Gears: 3.70 9"ford alum chunk,dana44,9bolt
Re: WTS ALUMINUM 9" 3rd member 31 spline locker you pick gears $900
Had my aluminum one on the street for 15yrs or so.
08-09-2017, 04:10 PM
#11
Senior Member
Join Date: Aug 2004
Location: Shippensburg, PA
Posts: 680
Received 0 Likes
on
0 Posts
Car: 1981 Buick Century Wagon
Engine: 87 GN engine
Transmission: 2004R
Axle/Gears: 3.73
Re: WTS ALUMINUM 9" 3rd member 31 spline locker you pick gears $880
can do another 9"aluminum 3rd member..31 spline Detroit locker. 3.25 bearings (the big ones) billet yoke 1350 or forged steel 1330 yoke.. you put it together all new parts $900.. $1100 assembled..
or if ya like ya can buy the Detroit locker 31 spline $250 shipped
all the small parts to bolt it together. bearings. bolts. shims..housing..yoke.. just ask..
or if ya like ya can buy the Detroit locker 31 spline $250 shipped
all the small parts to bolt it together. bearings. bolts. shims..housing..yoke.. just ask..
08-10-2017, 04:23 PM
#14
Senior Member
Join Date: Aug 2004
Location: Shippensburg, PA
Posts: 680
Received 0 Likes
on
0 Posts
Car: 1981 Buick Century Wagon
Engine: 87 GN engine
Transmission: 2004R
Axle/Gears: 3.73
Re: WTS ALUMINUM 9" 3rd member 31 spline locker you pick gears $900
