Cleaning out the Garage Sale
#1
Junior Member
Thread Starter
iTrader: (1)
Join Date: Apr 2006
Location: Perrysburg, Ohio
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Pontiac Firebird
Engine: 400 sbc
Transmission: TH400
Axle/Gears: Ford 9" 3.50 35 Spline
Cleaning out the Garage Sale
All Parts are used expect for the LCA Brackets.
BBK 58mm Throttle body BBK-1536
1985-88 5.7L TPI Camaro/Firebird/CORVETTE
Throttle body 58mm without top plate. I will include IAC and TPS also airfoil included $175 obo
Trick Flow 4130 Chromoly Pushrods
Pushrods, 5/16 in. Diameter, 7.150 in. Long, 0.080 in. Wall Set of 16 $40
MSD GM DUAL CONNECTOR COIL $15 Works with TPI or TBI
CSR Mini High Torque Starters 100SBP Mini, Staggered Bolt Pattern, 153 or 168 tooth. BBC or SBC Staggered Bolt Pattern $150 Sold
Canton 15-244 - SBC F BODY RR PAN This a used road race pan is for pre-'80 SBC blocks with left side dipsticks in '82-'92 F-Bodies. It has a 7-1/2" deep, 12" wide, 8-1/4" long sump for a 6 qt. system capacity. The Screen Windage Tray was removed. I will include a m55h oil pump and pickup. $150 Sold
Eagle H - Beam 6” SBC Rod crs-6000-bs 7/16 inch Rod Bolt 8740 chromoly steel bolt $200 - Sold
I may also be selling Moser 9” housing and 31 spline Moser axles I would prefer local for the axle and housing. - Sold
BMR CAB001 - Control Arm Relocation Brackets, Weld-on $50 - Sold
ATI Balancer for sbc $175 -Sold
Holley Stealth Ram SBC Intake PART# 7540 Includes fuel rails $300 (Non vortec) - Sold
BBK 58mm Throttle body BBK-1536
1985-88 5.7L TPI Camaro/Firebird/CORVETTE
Throttle body 58mm without top plate. I will include IAC and TPS also airfoil included $175 obo
Trick Flow 4130 Chromoly Pushrods
Pushrods, 5/16 in. Diameter, 7.150 in. Long, 0.080 in. Wall Set of 16 $40
MSD GM DUAL CONNECTOR COIL $15 Works with TPI or TBI
CSR Mini High Torque Starters 100SBP Mini, Staggered Bolt Pattern, 153 or 168 tooth. BBC or SBC Staggered Bolt Pattern $150 Sold
Canton 15-244 - SBC F BODY RR PAN This a used road race pan is for pre-'80 SBC blocks with left side dipsticks in '82-'92 F-Bodies. It has a 7-1/2" deep, 12" wide, 8-1/4" long sump for a 6 qt. system capacity. The Screen Windage Tray was removed. I will include a m55h oil pump and pickup. $150 Sold
Eagle H - Beam 6” SBC Rod crs-6000-bs 7/16 inch Rod Bolt 8740 chromoly steel bolt $200 - Sold
I may also be selling Moser 9” housing and 31 spline Moser axles I would prefer local for the axle and housing. - Sold
BMR CAB001 - Control Arm Relocation Brackets, Weld-on $50 - Sold
ATI Balancer for sbc $175 -Sold
Holley Stealth Ram SBC Intake PART# 7540 Includes fuel rails $300 (Non vortec) - Sold
Last edited by firebrdo88; 12-06-2017 at 06:59 AM.
#3
Junior Member
Thread Starter
iTrader: (1)
Join Date: Apr 2006
Location: Perrysburg, Ohio
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Pontiac Firebird
Engine: 400 sbc
Transmission: TH400
Axle/Gears: Ford 9" 3.50 35 Spline
Re: Cleaning out the Garage Sale
Here is a pic of them. They are clearanced for moser 9" housing.
#6
Junior Member
Thread Starter
iTrader: (1)
Join Date: Apr 2006
Location: Perrysburg, Ohio
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Pontiac Firebird
Engine: 400 sbc
Transmission: TH400
Axle/Gears: Ford 9" 3.50 35 Spline
Re: Cleaning out the Garage Sale
I have confirmed the balancer is 7.074" diameter. I do not have a part number for this.
Trending Topics
#8
Junior Member
Thread Starter
iTrader: (1)
Join Date: Apr 2006
Location: Perrysburg, Ohio
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Pontiac Firebird
Engine: 400 sbc
Transmission: TH400
Axle/Gears: Ford 9" 3.50 35 Spline
Re: Cleaning out the Garage Sale
The LCA and 9" housing and Axles are being worked out into a deal now. If it falls through I will let you know.
#10
Junior Member
Thread Starter
iTrader: (1)
Join Date: Apr 2006
Location: Perrysburg, Ohio
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Pontiac Firebird
Engine: 400 sbc
Transmission: TH400
Axle/Gears: Ford 9" 3.50 35 Spline
Re: Cleaning out the Garage Sale
Balancer, LCA Brackets, Ford 9" housing and axles are all sold. DM if anyone is interested in anything else.
#12
Junior Member
Thread Starter
iTrader: (1)
Join Date: Apr 2006
Location: Perrysburg, Ohio
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Pontiac Firebird
Engine: 400 sbc
Transmission: TH400
Axle/Gears: Ford 9" 3.50 35 Spline
Re: Cleaning out the Garage Sale
I was able to get an IAC Housing and TPS for the Throttle body.
#15
Junior Member
Thread Starter
iTrader: (1)
Join Date: Apr 2006
Location: Perrysburg, Ohio
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Pontiac Firebird
Engine: 400 sbc
Transmission: TH400
Axle/Gears: Ford 9" 3.50 35 Spline
Re: Cleaning out the Garage Sale
Oil Pan is sold. I have a few more things left.