Advice on headers
Thread Starter
Junior Member
Joined: May 2000
Posts: 41
Likes: 0
From: Hanover Michigan USA
Advice on headers
I may actually be going to order some headers tomorrow from a local parts store.I was wondering which headers would be good for me.they have to bolt up to the stock cat back.I want them to be cheap but descent quality.Which kind should I get and what price should I expect to pay.Remember I am not or can not order from summit.Buying these from performance auto part store.Also I dont have much room so this is a factor also.
Any accurate advice would be greatly appreciated
------------------
Chevy 355 cid chevy orange and lots of chrome
Vortec heads ported polished and milled also the exhaust ports are ported.
Edelbrock #7116 performer RPM intake also ported to match heads.
Keith black 12cc 9-6-1 compression flat top pistons.
Comp cams extreme energy #262 roller cam.
Pro jection 1 inch tbi adapter.
14 x 2 open air element (couldnt close hood)
Accel 8mm superstock wires.
Any accurate advice would be greatly appreciated
------------------
Chevy 355 cid chevy orange and lots of chrome
Vortec heads ported polished and milled also the exhaust ports are ported.
Edelbrock #7116 performer RPM intake also ported to match heads.
Keith black 12cc 9-6-1 compression flat top pistons.
Comp cams extreme energy #262 roller cam.
Pro jection 1 inch tbi adapter.
14 x 2 open air element (couldnt close hood)
Accel 8mm superstock wires.
Senior Member
Joined: Jul 1999
Posts: 849
Likes: 1
Try searching the archives:
Search Results
194 records found for headers
Click here to search again
--------------------------------------------------------------------------------
ThirdGen.Org on Quick Header question for everyone.....>>>>>>
ThirdGen.Org on Header installation question?
ThirdGen.Org on Header/Exhaust questions
Help! SLP Headers!
Re: Gears and headers
Re: Help! SLP Headers!
The way I figure it, w/in-->
Re: Help! SLP Headers!
? I thought the headers were 1 3/4'(NM)
Re: Help! SLP Headers!
Re: Gears and headers
Re: Edelbrock TES headers, shift kit(?) and 3.73 gears
Okay >>>>>>>>
Alex . . . .
Re: A little clarification....
Re: Leaky Headers
Re: Help! SLP Headers!
Update, Still Need To Know...
Aaaaaaaaarrrrrrrghhhhhh, i'll try again
Leaky Headers
Gears and headers
I think you're right, w/in--->
Re: Spark Plugs Headers...
ThirdGen.Org on Will L98 Camaro headers fit my L98 '91 Corvette ?n
Re: A dual flowmaster setup for 3rd gens?
Re: If you already have your headers.....
Headers...
ThirdGen.Org on Need input on some modifications to an 86 Z-28.
Spark Plugs Headers...
HEADERS
Opinions on stock intake and Lingen. 219 cam--->>
Okay, now I'm REALLY confused!
Try Uni-Seal Header Flange seal kit...
Stupid exhaust question
ThirdGen.Org on Catalytic Conv. Question
headers
****Last call for Mac exhaust GP****
I need help with cam and heads selection!
I wanted 1 3/4 BUT G's headers were 1 5/8 . . I couldn't pass them up for $225 n/m
Yes. They're 'Headers Across America'
) ...n/m
Questions on header gaskets and U-joints
Re: IS DYNOMAX A GOOD CAT BACK SYSTEM???
Re: 88 IROC Computer Questions.
i am doing something similar...
Need help with cam
Re: It's back - unfortunately
turn it of !!??!!?!?!!?
ThirdGen.Org on ...another ? for head cam gurus...
ThirdGen.Org on help482z28
ThirdGen.Org on About Cats....somebody please enlighten me...
****, got cross posted....w/n
EPA! Where?!
Great ideas . . . more within . . .
Go for it you ****in' freakazoid!!!!!!!!!! >>>>>>>
Hey Tim
some ideas..
Re: What kinda valve covers look AWESOME???
Injector size: What to use on mod 350 L98?
Hey!
NOT EXACTLY BUT ALMOST
cat-back exhaust question
Re: just the Y-PIPE is different go 4 it dude! :-) N/M
WOO HOO!!!!!
Thanks, bruh.........n/m
Re: Stephen........
YO COCHESE!!! straight from the AFR tech guru>>>>>>
Hey there Mr. Laukner. I've got some much anticipated info for ya!!
Big bang for big buck
Heads for a 305
Re: Trax, Stephen: More info please.......
Re: DZM brackets...initial evaluation...-->
ThirdGen.Org on questions on beefing up new engine
ThirdGen.Org on 87 vette base on an 89 TPI camaro?
This is getting Real old-Collectoer Gaskets blow>>
what i used..
Amir . . . within guy >>>>>>>>
Re:Had to post and clear screen...
Re: Question about ZZ3 springs
Well in that case...........
Re: Need help with aftermarket add ons.
Re: You got 14.03 out of your car!
How about this dude....
Re: Need info on 305TBI to350TBI engine swap.
Damn Skippy---------->
Modifications
It's easy on my car....
Started on motor today, got many questions, HELP!
What my motor guru told me....
I know just what you need.
Re: 86 Iroc-Z horsepower?
Re: Need info on 305TBI to350TBI engine swap.
Re: One suggestion...
Does this sound okay to start tearing out my motor
Compatibility of Camaro and Firebird
Re: CHIP Question
Re: No muffler here!
No muffler here!
Re: Catalytic Converter Size
DZM brackets...initial evaluation...-->
Re: ZZ4 Conversion...
Re: I agree fully. w/in
Hollow?!
Re: What's the best sounding muffler for a 305 RS?
Hey Ed Maher
Hey hoseheads---->
Re: What to do with my 700R4?
A little clarification....
my $.02
ThirdGen.Org on catback systems
ThirdGen.Org on Jacking UP F-body for a change.
ThirdGen.Org on How to get 400 HP the cheapest?
ThirdGen.Org on Arizona SM Runners
ThirdGen.Org on exhuast manifolds
ThirdGen.Org on 91 Camaro overheating at idle, not fan/thermostat
ThirdGen.Org on What stall RPM do i need????
ThirdGen.Org on CompuCam 2050 and a Throttle Body
ThirdGen.Org on Will my intake choke my motor????
ThirdGen.Org on Starting Problems 1989 IROC
ThirdGen.Org on Anybody read the new HPP??
Re: I have some Exhaust Systems Questions?
Re: Max cam lift?????
I need HELP with my cam decision and other things!
Well, it seems to me...........
what intake cc AFR head for 420 Superram
Re: Brian SLP, Within>>>>
Trick flow , yes or no
What's everyones opinion on RUNNERS?
Interesting thing though...
A question for all you AFR head gurus...
Diff. between AFR190's and Trick flows
Re: Some Info on DYNOMAX Super Turbo systems . . .
Re: VERY CONFUSED!!!
Everyones opinions needed with in>>>>>>>>
The Best order of mods . . . >>>>>>>
Hey ---------->
that about covers it. n/m
It can be done and it is HIGHLY recommended
how about a 406???
This question just keeps popin' up!
Re: Where to find GW/KB???
Re: These 'cats' are tough....>>>>
one easy thing....
Re: Test drove a 92 mustang, wanna laugh? read this.
Re: Didja know...>>>
How much horsepower?
I disagree with Tom's sound opinion >>>>
Re: Flowmaster Force II is ultra quiet......>>>>>>>>
Engine mods and SFCs started for '91 T/A
Now you change your story..
Re: Attn: TBI guys- Edelbrock Intake Manifold
Just the back two on the pass side?
Sorry man thats as good as it gets n/m
What cam/heads for this 383?! More within, help me
Re: Modifying intake on 350 TPI?
Re: performer TBI
Re: Modifying intake on 350 TPI?
Modifying intake on 350 TPI?
more...
Cheap mods for 305 tbi?
Re: Help me build my 350 TPI!
Yo Juan-be-one-kenobi!
my stupid ideas
What mods are best for a 88 350 TPI?
ATTN: Shane Kula
They sound great, lower tone then stock ...
I love it!!-->Mail coming your way.
THANKS
More confusion about the ZZ3 heads!!!!!!!!
Here ya go...give it a minute to load....
More but limited information at this time....
Re: Camshaft Specifications??? HELP!!!
Cyberdyne Speedo Recalibration box installed
ME TOO !!!! n/m
Here's your chance to build MY car!!!!!!!!!
A dual flowmaster setup for 3rd gens?
Re: tell more about your 383 TPI
TAP PRO track bar
ASM Semi-Siamesed runners INSTALLED TODAY >>>>>>>
Re: Best exhaust for 350HP 350
Best exhaust for 350HP 350
**Attn. JUAN--- A few questions for ya!!---->>>
I got mine from TPIS----->
People with ported plenums ..........->
Re: Throttle Bodies
** ATTN** JIMBO, DAN MARTIN, slp exhaust ??`s>>
Same for me..
My friend has one too.....
Ok, here's what I thought, but it's my first time(engine)w/in-->
Best Cam/heads for 13 second '89 TA
Is Timing Really Everything?!
Camshaft
A little computer chip trivia...everybody join in!
hey Dale........
Mods
--------------------------------------------------------------------------------
Search Again
Enter your query:
You can use the text qualifiers AND or OR to perform your search if it has multiple words
All content © 2000 thirdgen.org. All rights reserved. No part of this website may be reproduced without the expressed, documented consent of thirdgen.org's administrators.
------------------
FORMULA 350 TK
Southern California 3rd Generation F-Body Organization©
Search Results
194 records found for headers
Click here to search again
--------------------------------------------------------------------------------
ThirdGen.Org on Quick Header question for everyone.....>>>>>>
ThirdGen.Org on Header installation question?
ThirdGen.Org on Header/Exhaust questions
Help! SLP Headers!
Re: Gears and headers
Re: Help! SLP Headers!
The way I figure it, w/in-->
Re: Help! SLP Headers!
? I thought the headers were 1 3/4'(NM)
Re: Help! SLP Headers!
Re: Gears and headers
Re: Edelbrock TES headers, shift kit(?) and 3.73 gears
Okay >>>>>>>>
Alex . . . .
Re: A little clarification....
Re: Leaky Headers
Re: Help! SLP Headers!
Update, Still Need To Know...
Aaaaaaaaarrrrrrrghhhhhh, i'll try again
Leaky Headers
Gears and headers
I think you're right, w/in--->
Re: Spark Plugs Headers...
ThirdGen.Org on Will L98 Camaro headers fit my L98 '91 Corvette ?n
Re: A dual flowmaster setup for 3rd gens?
Re: If you already have your headers.....
Headers...
ThirdGen.Org on Need input on some modifications to an 86 Z-28.
Spark Plugs Headers...
HEADERS
Opinions on stock intake and Lingen. 219 cam--->>
Okay, now I'm REALLY confused!
Try Uni-Seal Header Flange seal kit...
Stupid exhaust question
ThirdGen.Org on Catalytic Conv. Question
headers
****Last call for Mac exhaust GP****
I need help with cam and heads selection!
I wanted 1 3/4 BUT G's headers were 1 5/8 . . I couldn't pass them up for $225 n/m
Yes. They're 'Headers Across America'
) ...n/mQuestions on header gaskets and U-joints
Re: IS DYNOMAX A GOOD CAT BACK SYSTEM???
Re: 88 IROC Computer Questions.
i am doing something similar...
Need help with cam
Re: It's back - unfortunately
turn it of !!??!!?!?!!?
ThirdGen.Org on ...another ? for head cam gurus...
ThirdGen.Org on help482z28
ThirdGen.Org on About Cats....somebody please enlighten me...
****, got cross posted....w/n
EPA! Where?!
Great ideas . . . more within . . .
Go for it you ****in' freakazoid!!!!!!!!!! >>>>>>>
Hey Tim
some ideas..
Re: What kinda valve covers look AWESOME???
Injector size: What to use on mod 350 L98?
Hey!
NOT EXACTLY BUT ALMOST
cat-back exhaust question
Re: just the Y-PIPE is different go 4 it dude! :-) N/M
WOO HOO!!!!!
Thanks, bruh.........n/m
Re: Stephen........
YO COCHESE!!! straight from the AFR tech guru>>>>>>
Hey there Mr. Laukner. I've got some much anticipated info for ya!!
Big bang for big buck
Heads for a 305
Re: Trax, Stephen: More info please.......
Re: DZM brackets...initial evaluation...-->
ThirdGen.Org on questions on beefing up new engine
ThirdGen.Org on 87 vette base on an 89 TPI camaro?
This is getting Real old-Collectoer Gaskets blow>>
what i used..
Amir . . . within guy >>>>>>>>
Re:Had to post and clear screen...
Re: Question about ZZ3 springs
Well in that case...........
Re: Need help with aftermarket add ons.
Re: You got 14.03 out of your car!
How about this dude....
Re: Need info on 305TBI to350TBI engine swap.
Damn Skippy---------->
Modifications
It's easy on my car....
Started on motor today, got many questions, HELP!
What my motor guru told me....
I know just what you need.
Re: 86 Iroc-Z horsepower?
Re: Need info on 305TBI to350TBI engine swap.
Re: One suggestion...
Does this sound okay to start tearing out my motor
Compatibility of Camaro and Firebird
Re: CHIP Question
Re: No muffler here!
No muffler here!
Re: Catalytic Converter Size
DZM brackets...initial evaluation...-->
Re: ZZ4 Conversion...
Re: I agree fully. w/in
Hollow?!
Re: What's the best sounding muffler for a 305 RS?
Hey Ed Maher
Hey hoseheads---->
Re: What to do with my 700R4?
A little clarification....
my $.02
ThirdGen.Org on catback systems
ThirdGen.Org on Jacking UP F-body for a change.
ThirdGen.Org on How to get 400 HP the cheapest?
ThirdGen.Org on Arizona SM Runners
ThirdGen.Org on exhuast manifolds
ThirdGen.Org on 91 Camaro overheating at idle, not fan/thermostat
ThirdGen.Org on What stall RPM do i need????
ThirdGen.Org on CompuCam 2050 and a Throttle Body
ThirdGen.Org on Will my intake choke my motor????
ThirdGen.Org on Starting Problems 1989 IROC
ThirdGen.Org on Anybody read the new HPP??
Re: I have some Exhaust Systems Questions?
Re: Max cam lift?????
I need HELP with my cam decision and other things!
Well, it seems to me...........
what intake cc AFR head for 420 Superram
Re: Brian SLP, Within>>>>
Trick flow , yes or no
What's everyones opinion on RUNNERS?
Interesting thing though...
A question for all you AFR head gurus...
Diff. between AFR190's and Trick flows
Re: Some Info on DYNOMAX Super Turbo systems . . .
Re: VERY CONFUSED!!!
Everyones opinions needed with in>>>>>>>>
The Best order of mods . . . >>>>>>>
Hey ---------->
that about covers it. n/m
It can be done and it is HIGHLY recommended
how about a 406???
This question just keeps popin' up!
Re: Where to find GW/KB???
Re: These 'cats' are tough....>>>>
one easy thing....
Re: Test drove a 92 mustang, wanna laugh? read this.
Re: Didja know...>>>
How much horsepower?
I disagree with Tom's sound opinion >>>>
Re: Flowmaster Force II is ultra quiet......>>>>>>>>
Engine mods and SFCs started for '91 T/A
Now you change your story..
Re: Attn: TBI guys- Edelbrock Intake Manifold
Just the back two on the pass side?
Sorry man thats as good as it gets n/m
What cam/heads for this 383?! More within, help me
Re: Modifying intake on 350 TPI?
Re: performer TBI
Re: Modifying intake on 350 TPI?
Modifying intake on 350 TPI?
more...
Cheap mods for 305 tbi?
Re: Help me build my 350 TPI!
Yo Juan-be-one-kenobi!
my stupid ideas
What mods are best for a 88 350 TPI?
ATTN: Shane Kula
They sound great, lower tone then stock ...
I love it!!-->Mail coming your way.
THANKS
More confusion about the ZZ3 heads!!!!!!!!
Here ya go...give it a minute to load....
More but limited information at this time....
Re: Camshaft Specifications??? HELP!!!
Cyberdyne Speedo Recalibration box installed
ME TOO !!!! n/m
Here's your chance to build MY car!!!!!!!!!
A dual flowmaster setup for 3rd gens?
Re: tell more about your 383 TPI
TAP PRO track bar
ASM Semi-Siamesed runners INSTALLED TODAY >>>>>>>
Re: Best exhaust for 350HP 350
Best exhaust for 350HP 350
**Attn. JUAN--- A few questions for ya!!---->>>
I got mine from TPIS----->
People with ported plenums ..........->
Re: Throttle Bodies
** ATTN** JIMBO, DAN MARTIN, slp exhaust ??`s>>
Same for me..
My friend has one too.....
Ok, here's what I thought, but it's my first time(engine)w/in-->
Best Cam/heads for 13 second '89 TA
Is Timing Really Everything?!
Camshaft
A little computer chip trivia...everybody join in!
hey Dale........
Mods
--------------------------------------------------------------------------------
Search Again
Enter your query:
You can use the text qualifiers AND or OR to perform your search if it has multiple words
All content © 2000 thirdgen.org. All rights reserved. No part of this website may be reproduced without the expressed, documented consent of thirdgen.org's administrators.
------------------
FORMULA 350 TK
Southern California 3rd Generation F-Body Organization©
Senior Member
Joined: Jul 1999
Posts: 849
Likes: 1
And then, there is the current Search function on these boards:
Search Results:
Displaying Topics 1 - 40 (136 total) [Next Topics] New Search | Back to Forums
Topic Name Date Forum/Archive
SLP Exhaust vs. Flowmaster/Hooker Mongoose July 30, 2000 Exhaust
Exhaust note volume level - factors influencing 89BlwnRs July 29, 2000 Exhaust
Who makes 1 5/8" long tubes that fit our cars? 88'camaro305TBI September 11, 2000 Exhaust
Exhaust i want to get? Dan87IROC-Z September 10, 2000 Exhaust
TES sounds on 89 RS w/ TBI 89BlwnRs September 10, 2000 Exhaust
4" bends 88IROCs September 23, 2000 Exhaust
Test pipe Beefy89 September 11, 2000 Exhaust
Who knows alot about SLP headers and their Y-pipe? Kevin91Z September 11, 2000 Exhaust
whats the best sounding muffler? 86Trans Am September 25, 2000 Exhaust
Could I fit 4th gen headers on my car? 3.1 firebird September 20, 2000 Exhaust
Headers Dan87IROC-Z September 13, 2000 Exhaust
No Cat? Dan87IROC-Z September 13, 2000 Exhaust
Where can i get a high flow y-pipe for hooker 1-5/8" competition headers? 88'camaro305TBI September 12, 2000 Exhaust
need hi-flo cat Scott 87 IROC-Z September 13, 2000 Exhaust
SUCESSFUL Dual Exhaust Only Please... Lostsol September 14, 2000 Exhaust
exhaust hookin88formula September 13, 2000 Exhaust
Does any1 else have the Flowmaster 80 Series on an L98???? Hunter Motorsports September 17, 2000 Exhaust
Am I on the right track? 82z September 14, 2000 Exhaust
Pictures of Edelbrock TES headers on my right hand drive IROC-Z Chuck Everly September 14, 2000 Exhaust
B iggest y-pipe...... calroc September 14, 2000 Exhaust
Cracking exhaust sound ! Bob R September 14, 2000 Exhaust
Cat back? Mkos1980 September 14, 2000 Exhaust
Anyone with Heddman long tubes>>> Phil87IROC September 18, 2000 Exhaust
cut-out ?s tzweelz September 16, 2000 Exhaust
What installation kit should I get for SLP headers? IROCZZ3 September 18, 2000 Exhaust
Taking off cat.. fb305svs September 19, 2000 Exhaust
Anyone need a new cat? -=Nitro7=- September 22, 2000 Exhaust
Which headers? 1 5/8, tri-y, 1 3/4 ??? Kevin91Z September 19, 2000 Exhaust
Performance Exhaust CamaroX84 September 19, 2000 Exhaust
Exhaust System CamaroX84 September 19, 2000 Exhaust
Banks VS. Flowmaster? 85ZZ4TPI September 19, 2000 Exhaust
Open Exhaust -- CO Danger? markz28 September 19, 2000 Exhaust
Engine back exhaust RSS September 20, 2000 Exhaust
Aftermarket exhaust....Does low back pressure = loss in low end torque? Dan87IROC-Z September 20, 2000 Exhaust
Clear this up for me... tesla042 September 20, 2000 Exhaust
Questions on SLP headers. GTARob September 20, 2000 Exhaust
Edelbrock CamaroX84 September 20, 2000 Exhaust
Thoughts on 1 Chamber Flowmaster MIKES 88GTA September 21, 2000 Exhaust
Flowmaster restriction? Slow88RS September 24, 2000 Exhaust
Loss of power with headers? 3.1 firebird September 21, 2000 Exhaust
[Next Topics]
Powered by Infopop www.infopop.com © 2000
Ultimate Bulletin Board 5.45c
Search Results:
Displaying Topics 1 - 40 (136 total) [Next Topics] New Search | Back to Forums
Topic Name Date Forum/Archive
SLP Exhaust vs. Flowmaster/Hooker Mongoose July 30, 2000 Exhaust
Exhaust note volume level - factors influencing 89BlwnRs July 29, 2000 Exhaust
Who makes 1 5/8" long tubes that fit our cars? 88'camaro305TBI September 11, 2000 Exhaust
Exhaust i want to get? Dan87IROC-Z September 10, 2000 Exhaust
TES sounds on 89 RS w/ TBI 89BlwnRs September 10, 2000 Exhaust
4" bends 88IROCs September 23, 2000 Exhaust
Test pipe Beefy89 September 11, 2000 Exhaust
Who knows alot about SLP headers and their Y-pipe? Kevin91Z September 11, 2000 Exhaust
whats the best sounding muffler? 86Trans Am September 25, 2000 Exhaust
Could I fit 4th gen headers on my car? 3.1 firebird September 20, 2000 Exhaust
Headers Dan87IROC-Z September 13, 2000 Exhaust
No Cat? Dan87IROC-Z September 13, 2000 Exhaust
Where can i get a high flow y-pipe for hooker 1-5/8" competition headers? 88'camaro305TBI September 12, 2000 Exhaust
need hi-flo cat Scott 87 IROC-Z September 13, 2000 Exhaust
SUCESSFUL Dual Exhaust Only Please... Lostsol September 14, 2000 Exhaust
exhaust hookin88formula September 13, 2000 Exhaust
Does any1 else have the Flowmaster 80 Series on an L98???? Hunter Motorsports September 17, 2000 Exhaust
Am I on the right track? 82z September 14, 2000 Exhaust
Pictures of Edelbrock TES headers on my right hand drive IROC-Z Chuck Everly September 14, 2000 Exhaust
B iggest y-pipe...... calroc September 14, 2000 Exhaust
Cracking exhaust sound ! Bob R September 14, 2000 Exhaust
Cat back? Mkos1980 September 14, 2000 Exhaust
Anyone with Heddman long tubes>>> Phil87IROC September 18, 2000 Exhaust
cut-out ?s tzweelz September 16, 2000 Exhaust
What installation kit should I get for SLP headers? IROCZZ3 September 18, 2000 Exhaust
Taking off cat.. fb305svs September 19, 2000 Exhaust
Anyone need a new cat? -=Nitro7=- September 22, 2000 Exhaust
Which headers? 1 5/8, tri-y, 1 3/4 ??? Kevin91Z September 19, 2000 Exhaust
Performance Exhaust CamaroX84 September 19, 2000 Exhaust
Exhaust System CamaroX84 September 19, 2000 Exhaust
Banks VS. Flowmaster? 85ZZ4TPI September 19, 2000 Exhaust
Open Exhaust -- CO Danger? markz28 September 19, 2000 Exhaust
Engine back exhaust RSS September 20, 2000 Exhaust
Aftermarket exhaust....Does low back pressure = loss in low end torque? Dan87IROC-Z September 20, 2000 Exhaust
Clear this up for me... tesla042 September 20, 2000 Exhaust
Questions on SLP headers. GTARob September 20, 2000 Exhaust
Edelbrock CamaroX84 September 20, 2000 Exhaust
Thoughts on 1 Chamber Flowmaster MIKES 88GTA September 21, 2000 Exhaust
Flowmaster restriction? Slow88RS September 24, 2000 Exhaust
Loss of power with headers? 3.1 firebird September 21, 2000 Exhaust
[Next Topics]
Powered by Infopop www.infopop.com © 2000
Ultimate Bulletin Board 5.45c
Supreme Member
Joined: Feb 2000
Posts: 1,196
Likes: 0
From: Fort Collins, Colorado
Just order a set of Edelbrock TES headers from Summit of Jegs, they are around $300 and include the headers, y-pipe, O2 sensor fitting, all mounting hardware, everything you need, they work great, defietly the best mod I have done.
------------------
1987 Chevy Camaro IROC-Z
L98 TPI 350 (5.7L)
TH 700R-4 Transmission with 2.77:1 Rear End
Current Mods: Edelbrock TES 1 5/8" Headers, Hooker Aerochamber Cat-Back System, Performance Resource Chip with 160* Thermostat, Accel Ignition Components, K&N Filters, All Free Mods, Falken ZIEX Z-Rated Tires.
Best ET : 14.32 @ 97.7mph
(corrected for elevation)
------------------
1987 Chevy Camaro IROC-Z
L98 TPI 350 (5.7L)
TH 700R-4 Transmission with 2.77:1 Rear End
Current Mods: Edelbrock TES 1 5/8" Headers, Hooker Aerochamber Cat-Back System, Performance Resource Chip with 160* Thermostat, Accel Ignition Components, K&N Filters, All Free Mods, Falken ZIEX Z-Rated Tires.
Best ET : 14.32 @ 97.7mph
(corrected for elevation)
Thread
Thread Starter
Forum
Replies
Last Post
