HELP - need to know what to get - car is going in tommorrow
Thread Starter
Senior Member
Joined: Aug 1999
Posts: 618
Likes: 0
From: Central, NJ
Car: 1989 IROC-Z
Engine: 350 Vortech Supercharged ZZ4 TPI
Transmission: T56
Axle/Gears: 3.73
HELP - need to know what to get - car is going in tommorrow
I have a set of Jet-Hot Coated SLP 1 5/8 headers for my 89 L98.
Exactly what gaskets do I need for this? I am under the impression that I need the header gaskets (dont know what size, etc) and collector gaskets (dont know the sizes, etc of this either). What specs do I need to get to work properly with what I have?
Thanks a lot for the help.
------------------
***The driver formerly known as 89IROCZ***
1989 Chevrolet Camaro IROC-Z
350c.i. TPI, rebuilt 700R4 auto w/shift kit, Dual catalyst Monza PaceSetter Cat-Back (currently no muffler, sounds on webpage), SLP 1 5/8 Coated Headers on order, 3.23 Posi rear, Hypertech chip with 160stat, Under-Drive pulleys, AFPR, K&N's, !Air Box w/ Ram Air, moddified MAF, throttle body coolant bypass, Spohn SFC's on order, Alarm, Keyless entry, remote starter, 92 Z28 AeroWing, Brand New Paint (6/21/01)
Future: ZZ4 TPI w/EGR, T56, 3.42 or 3.73, Spohn strut tower brace and LCA's
1989 Chevrolet Celebrity Eurosport
2.8 MPFI, no mods
225,000 miles and still ticking!
More info, pictures and sounds (of the IROC) available on my webpage: http://go.to/iroc-z
AOL IMer: GPA 0point0
Exactly what gaskets do I need for this? I am under the impression that I need the header gaskets (dont know what size, etc) and collector gaskets (dont know the sizes, etc of this either). What specs do I need to get to work properly with what I have?
Thanks a lot for the help.
------------------
***The driver formerly known as 89IROCZ***
1989 Chevrolet Camaro IROC-Z
350c.i. TPI, rebuilt 700R4 auto w/shift kit, Dual catalyst Monza PaceSetter Cat-Back (currently no muffler, sounds on webpage), SLP 1 5/8 Coated Headers on order, 3.23 Posi rear, Hypertech chip with 160stat, Under-Drive pulleys, AFPR, K&N's, !Air Box w/ Ram Air, moddified MAF, throttle body coolant bypass, Spohn SFC's on order, Alarm, Keyless entry, remote starter, 92 Z28 AeroWing, Brand New Paint (6/21/01)
Future: ZZ4 TPI w/EGR, T56, 3.42 or 3.73, Spohn strut tower brace and LCA's
1989 Chevrolet Celebrity Eurosport
2.8 MPFI, no mods
225,000 miles and still ticking!
More info, pictures and sounds (of the IROC) available on my webpage: http://go.to/iroc-z
AOL IMer: GPA 0point0
Junior Member
Joined: Jul 2001
Posts: 70
Likes: 0
From: ct
slp has an instalation kit for the headers that is very helpfull i got mine from next generation part #e24 for dual cat cars its $89 but worth it to have everything you need in one box
------------------
91 Z28 slp headers adj reg accell cap rotor coil comp cam roller
random tech cats flowmaster catback
new motor almsot in
------------------
91 Z28 slp headers adj reg accell cap rotor coil comp cam roller
random tech cats flowmaster catback
new motor almsot in
Thread
Thread Starter
Forum
Replies
Last Post
Linson
Auto Detailing and Appearance
40
Aug 21, 2015 02:12 PM