Third Generation F-Body Message Boards - Fabrication https://www.thirdgen.org/forums/ Custom fabrication ideas and concepts ranging from body kits, interior work, driveline tech, and much more. en Mon, 18 May 2026 00:58:46 GMT vBulletin 60 https://www.thirdgen.org/forums/images/misc/rss.jpg Third Generation F-Body Message Boards - Fabrication https://www.thirdgen.org/forums/ Making signs https://www.thirdgen.org/forums/fabrication/794838-making-signs.html Fri, 08 May 2026 19:43:17 GMT Had some Thirdgen people ask for signs, after seeing some of the other muscle, hot rod, exotic, and classic car signs I've produced.
This one is in process and should be completed in a week.

This is a very low quality .jpeg of a screenshot. It's much more detailed and refined in person.
The Trans Am was already delivered.





]]> Fabrication https://www.thirdgen.org/forums/fabrication/794838-making-signs.html Modified L69 Dual Snorkel https://www.thirdgen.org/forums/fabrication/794837-modified-l69-dual-snorkel.html Fri, 08 May 2026 19:42:32 GMT I did a thing which many of you will call me out on it. Since I converted over to the serpentine belt system, my dual snorkel air cleaner never fit quite right on the passenger side. So I removed,... I did a thing which many of you will call me out on it. Since I converted over to the serpentine belt system, my dual snorkel air cleaner never fit quite right on the passenger side. So I removed, that snorkel and put some metal mesh secured with some self tapping screws. I still need to clean up the air cleaner by removing the excess metal around the hole and re-paint. Cold air will still come in through the driver's side. As for the the passenger side, my car is a cruiser, not a bruiser. It's been running great and not stumbling since I did this.




]]> Fabrication MY87LT https://www.thirdgen.org/forums/fabrication/794837-modified-l69-dual-snorkel.html Door window tracks, paint before shaved door popper install https://www.thirdgen.org/forums/fabrication/794724-door-window-tracks-paint.html Fri, 24 Apr 2026 18:40:54 GMT I am shaving my door handles and finaly got everything primed, as I get ready to fit the window tracks back into the doors, I noticed the tracks have some slight surface rust. What would you guys... I am shaving my door handles and finaly got everything primed, as I get ready to fit the window tracks back into the doors, I noticed the tracks have some slight surface rust.

What would you guys paint this stuff with?

I use Eastwood products. I have rust encapsulator, as well as 2k epoxy primer. Open to any suggestions.

]]> Fabrication dennisbernal91z https://www.thirdgen.org/forums/fabrication/794724-door-window-tracks-paint.html