Fender Flares on a third gen
#3
Member
Thread Starter
iTrader: (1)
Join Date: Apr 2007
Location: Sparta, NJ
Posts: 358
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1987 Camaro Z28
Engine: Carbed 355
Transmission: Borg Warner T56
Axle/Gears: 4th gen 10 bolt 3:73 Richmond gears
Re: Fender Flares on a third gen
.
Last edited by mac86; 03-19-2015 at 08:09 AM.
#5
Senior Member
iTrader: (6)
Re: Fender Flares on a third gen
I am sure I am wrong but you might just have to be the first. Those cars with big flares like that look like Salt Flat cars.
One of my favorite cars of all time was a 69 Camaro around where I grew up with a wide body kit or something on it. We rarely ever saw it but when we did you knew that car a mile away. It was almost as if they widened the body 2" all the way around and lowered it by 3". Weird but so cool!!!!
Now back to your fender flares - Custom touches can go south quickly. You can spend so much time and effort making them that you lose interest. You will have to make both side identical and strong.
Don't let anyone discourage you if this is what you want. George Barris had and still has critics. Now, for the flip side - I see a lot of cars in the Junk Yard that someone tried to customize!
One of my favorite cars of all time was a 69 Camaro around where I grew up with a wide body kit or something on it. We rarely ever saw it but when we did you knew that car a mile away. It was almost as if they widened the body 2" all the way around and lowered it by 3". Weird but so cool!!!!
Now back to your fender flares - Custom touches can go south quickly. You can spend so much time and effort making them that you lose interest. You will have to make both side identical and strong.
Don't let anyone discourage you if this is what you want. George Barris had and still has critics. Now, for the flip side - I see a lot of cars in the Junk Yard that someone tried to customize!
Last edited by rarebmx; 06-04-2013 at 02:26 PM.
#6
Supreme Member
iTrader: (8)
Join Date: Jul 2001
Location: New Boston, IL, USA
Posts: 3,204
Likes: 0
Received 6 Likes
on
6 Posts
Car: '90 Formula 350
Engine: 383 SBC
Transmission: ProBuilt S/S 700-R4 & ACT 9" Stall
Axle/Gears: 10 bolt 3.23
Re: Fender Flares on a third gen
The aftermarket Wide Body Kit comes to mind.
#7
Member
Thread Starter
iTrader: (1)
Join Date: Apr 2007
Location: Sparta, NJ
Posts: 358
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1987 Camaro Z28
Engine: Carbed 355
Transmission: Borg Warner T56
Axle/Gears: 4th gen 10 bolt 3:73 Richmond gears
Re: Fender Flares on a third gen
.
Last edited by mac86; 03-19-2015 at 08:09 AM.
Trending Topics
#8
Member
Thread Starter
iTrader: (1)
Join Date: Apr 2007
Location: Sparta, NJ
Posts: 358
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1987 Camaro Z28
Engine: Carbed 355
Transmission: Borg Warner T56
Axle/Gears: 4th gen 10 bolt 3:73 Richmond gears
Re: Fender Flares on a third gen
.
Last edited by mac86; 03-19-2015 at 08:09 AM.
#9
Member
Thread Starter
iTrader: (1)
Join Date: Apr 2007
Location: Sparta, NJ
Posts: 358
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1987 Camaro Z28
Engine: Carbed 355
Transmission: Borg Warner T56
Axle/Gears: 4th gen 10 bolt 3:73 Richmond gears
Re: Fender Flares on a third gen
.
Last edited by mac86; 03-19-2015 at 08:08 AM.
#11
Member
Thread Starter
iTrader: (1)
Join Date: Apr 2007
Location: Sparta, NJ
Posts: 358
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1987 Camaro Z28
Engine: Carbed 355
Transmission: Borg Warner T56
Axle/Gears: 4th gen 10 bolt 3:73 Richmond gears
Re: Fender Flares on a third gen
.
Last edited by mac86; 03-19-2015 at 08:10 AM.
#13
Member
Thread Starter
iTrader: (1)
Join Date: Apr 2007
Location: Sparta, NJ
Posts: 358
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1987 Camaro Z28
Engine: Carbed 355
Transmission: Borg Warner T56
Axle/Gears: 4th gen 10 bolt 3:73 Richmond gears
Re: Fender Flares on a third gen
.
Last edited by mac86; 03-19-2015 at 08:10 AM.
#20
COTM Editor
iTrader: (11)
Join Date: Mar 2006
Location: WINDSOR, CO
Posts: 4,098
Likes: 0
Received 12 Likes
on
12 Posts
Car: 91 Z28, 87 SC, 90 IROC, 92 RS
Engine: LS1, 305 TPI, L98, NADA
Transmission: T56, 700r4's, and NADA
Axle/Gears: 3.89, 3.42, 3.23, NADA
Re: Fender Flares on a third gen
I have liked the widebody look, and the fender flares are growing on me. I actually prefer the bolt on look compared to the molded look you first posted.
I'm sure you all have seen this car... the disputed original for the Transformers Bumblebee... Amir's Vengance
(stole from post comparing the two)
I'm sure its gonna take many attempts to get it right... see right in above pic, and wrong on bumblebee, but I'm watching this for sure. Good luck man!
I'm sure you all have seen this car... the disputed original for the Transformers Bumblebee... Amir's Vengance
(stole from post comparing the two)
I'm sure its gonna take many attempts to get it right... see right in above pic, and wrong on bumblebee, but I'm watching this for sure. Good luck man!
#21
Senior Member
iTrader: (1)
Join Date: Mar 2012
Location: Georgia
Posts: 574
Likes: 0
Received 6 Likes
on
4 Posts
Car: 91' Z28. 70' Dune Buggy
Engine: LSX Cam/Full Bolt ons
Transmission: T56
Axle/Gears: 4.10
Re: Fender Flares on a third gen
I always thought fender flares would look sweet. Especially with the right wheel/tire combo and stance to top it off.
Good look on your project!
Good look on your project!
#22
Supreme Member
iTrader: (25)
Re: Fender Flares on a third gen
I have liked the widebody look, and the fender flares are growing on me. I actually prefer the bolt on look compared to the molded look you first posted.
I'm sure you all have seen this car... the disputed original for the Transformers Bumblebee... Amir's Vengance
(stole from post comparing the two)
I'm sure its gonna take many attempts to get it right... see right in above pic, and wrong on bumblebee, but I'm watching this for sure. Good luck man!
I'm sure you all have seen this car... the disputed original for the Transformers Bumblebee... Amir's Vengance
(stole from post comparing the two)
I'm sure its gonna take many attempts to get it right... see right in above pic, and wrong on bumblebee, but I'm watching this for sure. Good luck man!
common mistake, especially on vettes w/ L88 flares. The rears hanging way too low.
#24
Supreme Member
Join Date: Aug 2011
Location: Aloha, Oregon
Posts: 1,178
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Christine Z28
Engine: RV Cam and Intake 350 SBC
Transmission: 5speed
Axle/Gears: 3.08 ls Posi
Re: Fender Flares on a third gen
I'll take some bolt on, carbon fiber fender flares. Let me know when they're done
#25
Junior Member
Join Date: Mar 2010
Location: Edwards AFB
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 Camaro
Engine: 305 HO/ soon to be 4.8L LR4
Transmission: 700R4/ soon to be NV4500
Axle/Gears: Ford 8.8 w/ 3.73 posi
Re: Fender Flares on a third gen
haha was just talking about this with my buddy who is buying some for his 83 FB RX7...really wanna get some for my car when it is done...
#26
Member
Thread Starter
iTrader: (1)
Join Date: Apr 2007
Location: Sparta, NJ
Posts: 358
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1987 Camaro Z28
Engine: Carbed 355
Transmission: Borg Warner T56
Axle/Gears: 4th gen 10 bolt 3:73 Richmond gears
Re: Fender Flares on a third gen
.
Last edited by mac86; 03-19-2015 at 08:12 AM.
#27
Senior Member
Join Date: Nov 2007
Posts: 744
Likes: 0
Received 1 Like
on
1 Post
Car: 1983 Camaro Z28
Engine: 383
Transmission: TKO 600
Axle/Gears: Strange S60
Re: Fender Flares on a third gen
That car is one of my favorites of all time. I think your results are going to come out pretty good. The angle of the flare makes a big difference in looks. I would honestly try a little more shallow angle than the first picture and make it more like the picture I quoted.
Either way though it's going to look very unique and aggressive. Both good things.
Either way though it's going to look very unique and aggressive. Both good things.
#29
Member
Thread Starter
iTrader: (1)
Join Date: Apr 2007
Location: Sparta, NJ
Posts: 358
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1987 Camaro Z28
Engine: Carbed 355
Transmission: Borg Warner T56
Axle/Gears: 4th gen 10 bolt 3:73 Richmond gears
Re: Fender Flares on a third gen
.
Last edited by mac86; 03-19-2015 at 08:12 AM.
#31
Senior Member
Join Date: Mar 2012
Location: Ballwin, MO
Posts: 553
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Trans Am
Engine: 355 tpi
Transmission: 5 speed
#33
Member
Thread Starter
iTrader: (1)
Join Date: Apr 2007
Location: Sparta, NJ
Posts: 358
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1987 Camaro Z28
Engine: Carbed 355
Transmission: Borg Warner T56
Axle/Gears: 4th gen 10 bolt 3:73 Richmond gears
Re: Fender Flares on a third gen
no one sells bolt on flares for third gens. thats why i am making them. i am doing bolt on because you can not fiberglass to metal...well you can but over time it will crack and separate from the metal from heating and cooling.
#34
Member
Thread Starter
iTrader: (1)
Join Date: Apr 2007
Location: Sparta, NJ
Posts: 358
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1987 Camaro Z28
Engine: Carbed 355
Transmission: Borg Warner T56
Axle/Gears: 4th gen 10 bolt 3:73 Richmond gears
Re: Fender Flares on a third gen
I think you have a good idea here. Personally I think you're going a bit big but that's just my taste.
My flares are not as big as what you're doing but here are some pics of what I've bean doing, even my GFX are fiberglass so I could mold everything together.
Attachment 260178
Attachment 260179
Attachment 260180
My flares are not as big as what you're doing but here are some pics of what I've bean doing, even my GFX are fiberglass so I could mold everything together.
Attachment 260178
Attachment 260179
Attachment 260180
#40
Supreme Member
Join Date: Aug 2011
Location: Aloha, Oregon
Posts: 1,178
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Christine Z28
Engine: RV Cam and Intake 350 SBC
Transmission: 5speed
Axle/Gears: 3.08 ls Posi
#41
Member
Thread Starter
iTrader: (1)
Join Date: Apr 2007
Location: Sparta, NJ
Posts: 358
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1987 Camaro Z28
Engine: Carbed 355
Transmission: Borg Warner T56
Axle/Gears: 4th gen 10 bolt 3:73 Richmond gears
Re: Fender Flares on a third gen
i see it now. ill just re-shape it to be round since im cutting out the old fender.
The following users liked this post:
1986BANDIT (09-10-2019)
#45
Member
Thread Starter
iTrader: (1)
Join Date: Apr 2007
Location: Sparta, NJ
Posts: 358
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1987 Camaro Z28
Engine: Carbed 355
Transmission: Borg Warner T56
Axle/Gears: 4th gen 10 bolt 3:73 Richmond gears
Re: Fender Flares on a third gen
i think im going to save up for the wheels first and then do the flares when i have the rims, so i can have the perfect fit.
#49
Member
Thread Starter
iTrader: (1)
Join Date: Apr 2007
Location: Sparta, NJ
Posts: 358
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1987 Camaro Z28
Engine: Carbed 355
Transmission: Borg Warner T56
Axle/Gears: 4th gen 10 bolt 3:73 Richmond gears
Re: Fender Flares on a third gen
.
Last edited by mac86; 03-19-2015 at 08:14 AM.
#50
Supreme Member
iTrader: (25)
Re: Fender Flares on a third gen
You guys do know that GM offered flares on firebirds shipped to japan right? I have never seen the camaro type. The firebird ones are a little like Corvette Grand Sport flares and IMO pretty hideous but would make a nice starting pont