[NY] 1987 GTA PROJECT W/RAM AIR HOOD, WS6 SPOILER, & KNIGHT RIDER BUMPER
#1
1987 GTA PROJECT W/RAM AIR HOOD, WS6 SPOILER, & KNIGHT RIDER BUMPER
Up for sale is my 1987 GTA. It is black with black interior. It is a 305 TPI T-top car. The T-tops do not leak. Underneath appears to be rust free. Interior is ok with the exception of the dash pad(cracked) and headliner(sagging). It will need a complete restoration as the bumpers, fenders, hood, left door, & left 1/4 are damaged. 1 wheel is also damaged along the edge. I have pretty decent tires for it. I have all the body parts except the replacement fenders have the louvers. The left 1/4 can be repaired. I am also including my ram air 2 hood, ws6 spoiler, knight rider front bumper cover and some other parts. The vehicle is a digital dash car and I have another digital dash for it. The vehicle was a 5 speed car but I sold it and have a 700r4 that will be included. Vehicle is located in upstate NY and delivery is possible for a fee but I would rather have someone pick it all up. Price is $1500.00 firm so please do not offer any less. I do not have the title for the car so if someone is gonna use it to rebuild I have another title and vin tag for it from my 1988 TA. I confirmed the vehicle was not stolen but I never received the title from the prior owner and can no longer can get in touch with him as I have had the car for over 8 years. Please call me at 518-365-5796 if interested. I also can email additional pictures if needed.
#2
Member
iTrader: (2)
Join Date: Oct 2009
Location: Jacksonville, NC
Posts: 155
Likes: 0
Received 2 Likes
on
2 Posts
Car: 86 IROC-Z28
Engine: LB9
Transmission: 700r4
Axle/Gears: 3.27
Re: 1987 GTA PROJECT W/RAM AIR HOOD, WS6 SPOILER, & KNIGHT RIDER BUMPER
You can file for an abandoned title (different rules per state). If I remember right there is just a waiting period, if the registered owner doesn't claim it then it's yours. Might help you sell it. It's going to be hard to get that much money for a car that doesn't have a title. Does it run?
#3
Re: 1987 GTA PROJECT W/RAM AIR HOOD, WS6 SPOILER, & KNIGHT RIDER BUMPER
Not too concerned about the title issue. I can scrap the car if all else fails. This is why I am just making a package deal for everything. The car did run but that was 8 years ago and there is no transmission in it.
#4
Senior Member
iTrader: (7)
Join Date: May 2005
Location: Toronto, Ohio
Posts: 722
Likes: 0
Received 1 Like
on
1 Post
Car: 1991 Trans Am GTA
Engine: 355
Transmission: 4L60
Axle/Gears: 4th gen 10 bolt 3.42 posi
Re: 1987 GTA PROJECT W/RAM AIR HOOD, WS6 SPOILER, & KNIGHT RIDER BUMPER
Are you willing to sell the ram air hood if you do scrap it?
#6
Junior Member
iTrader: (1)
Join Date: May 2010
Location: Chicopee, MA
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Trans Am
Engine: 5.7 V8
Transmission: Automatic
Re: 1987 GTA PROJECT W/RAM AIR HOOD, WS6 SPOILER, & KNIGHT RIDER BUMPER
do you still have the knight rider bumper? if so email me x240sx@tmail.com for pics i might want it....
Trending Topics
#8
Re: 1987 GTA PROJECT W/RAM AIR HOOD, WS6 SPOILER, & KNIGHT RIDER BUMPER
New price on everything minus the bumper cover is $1250.00. Bumper has been sold. Thanks debelleman.
#9
Supreme Member
iTrader: (24)
Join Date: Jun 2005
Location: NC
Posts: 7,890
Likes: 0
Received 59 Likes
on
43 Posts
Car: 92 Firebird
Engine: Supercharged 6.0
Transmission: T56
Axle/Gears: 8.8 3.73
Re: 1987 GTA PROJECT W/RAM AIR HOOD, WS6 SPOILER, & KNIGHT RIDER BUMPER
I do not have the title for the car so if someone is gonna use it to rebuild I have another title and vin tag for it from my 1988 TA.
#10
Senior Member
iTrader: (2)
Join Date: Jan 2007
Location: jackson new jersey
Posts: 733
Likes: 0
Received 1 Like
on
1 Post
Car: 1991 camaro vert
Engine: ls1 soon
Transmission: t56 soon
Axle/Gears: moser 12bolt 4.10 soon!
Re: 1987 GTA PROJECT W/RAM AIR HOOD, WS6 SPOILER, & KNIGHT RIDER BUMPER
shhh!! its only illegal if u get caught lol wish i could get this but my funds are going towards an lsx swap free bump tho
#11
Re: 1987 GTA PROJECT W/RAM AIR HOOD, WS6 SPOILER, & KNIGHT RIDER BUMPER
Hello! I was wondering if you're willing to sell the knight rider bumper and the digital dash? If so, how much do you want for it? Thank you and have a wonderful week.
#14
Re: 1987 GTA PROJECT W/RAM AIR HOOD, WS6 SPOILER, & KNIGHT RIDER BUMPER
I still have the car and I have two of the digital dashboards. I remember the one that I took out of the other TA had like 160k or 180k and I think the one that is in the car has less but thats about all I can remember on both of them as it has been so long since they have been fired up. I am willing to sell the one that is out for less. Make me an offer. I saw one on ebay for $400.00 but I am not looking for that much. You can buy the entire car and hood & spoiler for $1000.00 if any interest.
#15
Member
Join Date: Aug 2011
Location: Genesee County NY
Posts: 118
Received 0 Likes
on
0 Posts
Car: 2001 GMC Sonoma 4.3/ 84 Trans Am
Engine: SBC 355
Transmission: 89 World Class Borg T5
Axle/Gears: 3.42 10 bolt
Re: 1987 GTA PROJECT W/RAM AIR HOOD, WS6 SPOILER, & KNIGHT RIDER BUMPER
hey what kind of rear end does it have and what is the gear ratio/posi/limited slip? I live in upstate and could pick it up.
#16
Re: 1987 GTA PROJECT W/RAM AIR HOOD, WS6 SPOILER, & KNIGHT RIDER BUMPER
I believe it has the Australian 9 bolt with 3:73 gears but I will need to double check. I am trying to get my friend to tow it to my house this week so I can start parting it out. Are you interested in the car or just the rear?
#17
Member
Join Date: Aug 2011
Location: Genesee County NY
Posts: 118
Received 0 Likes
on
0 Posts
Car: 2001 GMC Sonoma 4.3/ 84 Trans Am
Engine: SBC 355
Transmission: 89 World Class Borg T5
Axle/Gears: 3.42 10 bolt
Re: 1987 GTA PROJECT W/RAM AIR HOOD, WS6 SPOILER, & KNIGHT RIDER BUMPER
I would be interested in the whole car minus the ram hood and bumper if it has a 10 bolt posi rear. Where you located?
#18
Re: 1987 GTA PROJECT W/RAM AIR HOOD, WS6 SPOILER, & KNIGHT RIDER BUMPER
I am trying to get my friend to tow it to my house which is located just outside of Troy, NY. I will let you know on the rear but I almost positve that it's not a 10 bolt posi. I use to sell a bunch of those out the Monte SS' and they were pretty hard to come by in the 3rd gens.
#19
Member
Join Date: Aug 2011
Location: Genesee County NY
Posts: 118
Received 0 Likes
on
0 Posts
Car: 2001 GMC Sonoma 4.3/ 84 Trans Am
Engine: SBC 355
Transmission: 89 World Class Borg T5
Axle/Gears: 3.42 10 bolt
Re: 1987 GTA PROJECT W/RAM AIR HOOD, WS6 SPOILER, & KNIGHT RIDER BUMPER
oh okay? I am about 3 hours away from you probably won't be able to come and get it.
#20
Junior Member
Join Date: Jul 2002
Location: Batavia, NY 14020
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1987 GTA PROJECT W/RAM AIR HOOD, WS6 SPOILER, & KNIGHT RIDER BUMPER
I still have the car and I have two of the digital dashboards. I remember the one that I took out of the other TA had like 160k or 180k and I think the one that is in the car has less but thats about all I can remember on both of them as it has been so long since they have been fired up. I am willing to sell the one that is out for less. Make me an offer. I saw one on ebay for $400.00 but I am not looking for that much. You can buy the entire car and hood & spoiler for $1000.00 if any interest.
#21
Junior Member
Join Date: Feb 2018
Location: ny
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Car: Taz
Engine: 572
Transmission: t56
Axle/Gears: 333
Re: 1987 GTA PROJECT W/RAM AIR HOOD, WS6 SPOILER, & KNIGHT RIDER BUMPER
Where is NY is this car? I would like to learn more about it and come take a look.
Thank you
Thank you
Thread
Thread Starter
Forum
Replies
Last Post
1992 Trans Am
History / Originality
27
05-10-2023 07:19 PM
TA8487
Engine/Drivetrain/Suspension Wanted
1
08-16-2015 12:21 PM