Hey all Whats up , i need some help, ive got a 91 Camaro convertable, and my door panallen suck and the top pice is held on by screws,, and my middle councle is all jacked up,, i was wondering if they still make some kinda parts to help me out, or do i have to go to a junk yard, and get lucky.... pr do i have to spend 2000$ at a interor shop.. pleas let me know if yall have some leads,, and not EBAY..


thankx LAer on AdaM

 

I would stick to new parts. Then you know it's quality and it'll probably have a warranty.

heres a site to get your started and thinking about cost.
http://www.hawksthirdgenparts.com/in...S&Category=220
Start your search in google

good luck

 

I love the junkyard for anything and everything. Do a search on 4th gen. interior swaps. Most of a 4th gen camaro's interior will swap over to a thirdgen without much of an issue. Around my area it's easier to find a 93-up than a thirdgen in a junkyard.

 

patrol the forums and see whats for sale. I'm replacing about 60% of my sheet metal (basically anything but the unibody sections) with stuff I"m buying from folks here, and I intend to gut the interior and replace it with used parts, also likely to come from people in the forum.

There are at least a few people here that patrol junkyards and swap meets nearly full time it seems and sell what they get. Just try to locate a few of them, or someone parting a car out, and you'll find a good deal.

 

I'm in the process of putting 99 TA panels in mine and still have the ones I took out if your interested. I still need to clean em up but the panels, armrest lock switches/trim, and armrest support is all here.