[Wanted] wanted: t56 (lt1 style) from 93 to 97 fbody
03-17-2017, 09:31 PM
#1
Junior Member
Thread Starter
Join Date: Mar 2017
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
wanted: t56 (lt1 style) from 93 to 97 fbody
converting from 700r4(complete rebuilt,1800 stall, brake lockup converter, deep alum pan, shift kit,flywheel, fill tube and tv cables)
to t56 (mounts to lt1 motor).
would need t56 trans, bellhousing, shifter, hydraulics (master/slave cylinder), hydraulic throwout bearing unit.
willing to trade, or purchase t56 setup
let me know what you have. thanks
to t56 (mounts to lt1 motor).
would need t56 trans, bellhousing, shifter, hydraulics (master/slave cylinder), hydraulic throwout bearing unit.
willing to trade, or purchase t56 setup
let me know what you have. thanks
Last edited by silvvette; 03-18-2017 at 07:05 AM.
03-18-2017, 09:28 AM
#2
Member
Join Date: Dec 2016
Location: Sebastian FL
Posts: 187
Likes: 0
Received 1 Like
on
1 Post
Car: 87 firebird 86 c10 90 mustang
Engine: 383 sbc
Transmission: 97 t56
Axle/Gears: Moser 12 bolt 3.73
Re: wanted: t56 (lt1 style) from 93 to 97 fbody
I don't have a trans but if you find one without the bell housing I have one from my lt1 t56 swap I wouldn't want much for. I bought a Bob weir bell housing with internal slave cylinder so I could use any clutch flywheel or starter I wanted to. I didn't like the pull style clutch of the lt1.