Why do most people like the Transgo better than the B&M shiftkit?
 

Just curious,'cause I want a shiftkit soon,but want the better one.

Check out
http://www.superior-transmission.com

I have their HP kit and I'm very happy with it, but most people recommend Transgo.

------------------
GTA -89:Free flow muffler,dual 3" HF cats, Edelbrock headers, Vette heads, 1.52 RR 7/16, ZZ-9 cam, Big Mouth, AS&M LTB, ported plenum, 52 TB, MSD 6AL, TPIS level V prom, Mod .MAF, Superior shift-kit and some minor mods. and more to come!
http://www.itv.se/tacs/members_cars/m279/m279.html (Swedish Trans Am Club)

I have the Fairbanks kit listed as TRANSACTION SELECTIVE ACTION KIT with the billet super servo and it works very good. Use the link from GTA324 its a good kit.

------------------
92 Z28 5.7 TPI AUTO 105k factory motor and trans.

SLP headers and runners, B&M 2400 stall, shift kit,LCA brackets, EBACH spring kit, NITTO'S, NOS

best 60ft 1.87 1/4 12.48 @ 110.81

I want the transgo kit too. I don't know where the best/cheapest place to get it from is though.

------------------
89' 5.7L TPI Auto IROC
Flowmaster, high-flow converter, SLP headers, B&M console megashifter, MSD 6aL, airfoil, K&N's, Bosch Platinum +4, 8.8 wires, blah blah

The Transgo is a more complete shift kit.

It actually includes new springs, tells you where in the seperater plate to drill holes and how big.

This is actually the right way to install a shift kit.

Most other companies just want you to leave out a check ball, or plug this hole, or drill this.

The better way is to replace some springs to help change the pressure, not over work the springs themselves by changing the pressure of the fluid on the valves.

I have bought a few ransgo kits and have seen the B & M kits. I think the transgo is by far the better kit and is not that hard to install.

------------------
Sportsman II 72 CC heads, Pete Jackson gear drive, Performance Resources chip, Edelbrock 1 5/8" headers and Edelbrock cat back exhaust, hi-flow cats, Trans-go stage 3 shift kit, Vigilante 9.5" 2800 stall convertor, SLP cold air induction, SLP roller camshaft, 24lb ADS injectors, AFPR, 3.45 rear end gears, and other goodies...


raven.com

WHy doesn't anyone here try the B&M TransPak kit???

Only like $50 and has most of the stuff that the TransGo kit has. I have used them in lots of vehicles (instead of the B&M Shift Improver Kit) and they have worked out VERY well....