Third Generation F-Body Message Boards

Third Generation F-Body Message Boards (https://www.thirdgen.org/forums/)
-   Body (https://www.thirdgen.org/forums/body/)
-   -   My Black with blue pearl , with silver pearl stripes, and blue metal flake paint job (https://www.thirdgen.org/forums/body/698222-my-black-blue-pearl.html)

project89 03-11-2014 07:30 PM

My Black with blue pearl , with silver pearl stripes, and blue metal flake paint job
 
lol long thread topic i know, but i figured id share my paint progress as i get this thing all sprayed

for paint i am using

Primer
Summit black epoxy primer kit

Base coat
spi pure black base -- with blue pearl powder mixed in

clear
for the clear i will be using spi clear as well

this will come out just like the car pictured below
black in low/no light and blue in light/sunlight
http://www.johnheard.com/wp-content/...3/DSC01603.jpg

ontop of the black blue base we will be doing a set of ghost racing stripes with the silver pearl

once thats done the stripes will be masked off and the rest of the car will be sprayed with a light coat of .015 blue metal flake
this is the flake
http://i.ebayimg.com/00/s/NjUwWDQ1Mw...tS9Xy7/$_3.JPG


the car has already been primed and is waiting to be blocked and then it will be ready for the base

this weekend we are going to spray the engine bay so i can get the new engine back in the car

once my new 4 or 6 inch outlaw hood gets here ( havent picked one yet)
we will spray the rest of the car probably be about a week or 2


this is how the car sits now after primer
https://www.thirdgen.org/forums/atta...ps1d179391.jpg

https://www.thirdgen.org/forums/atta...ps9a720838.jpg

https://www.thirdgen.org/forums/atta...psc727e47d.jpg

should make for a subtle but wild paint job when u actually pay attention to the car

also in the last picture u can see why i ditched the factory hood

Lmancha96 03-11-2014 07:35 PM

Re: My Black with blue pearl , with silver pearl stripes, and blue metal flake paint
 
That paint is going to look awesome, cant wait to see it!

tylercamaro 03-11-2014 07:59 PM

Re: My Black with blue pearl , with silver pearl stripes, and blue metal flake paint
 
subd

ROCFATHER 03-11-2014 08:26 PM

Re: My Black with blue pearl , with silver pearl stripes, and blue metal flake paint
 
My two favorite colors on a 3rd gen..Black or Blue and you just put them both together in one shot!! Awesome dude cant wait to see her once she sprayed!

jazzdadss 03-13-2014 09:45 AM

Re: My Black with blue pearl , with silver pearl stripes, and blue metal flake paint
 
Can't wait to see this! Gonna be sweet!

carattini 03-13-2014 10:08 AM

Re: My Black with blue pearl , with silver pearl stripes, and blue metal flake paint
 
It is going to look grate. I'm looking to do the same EFX but with Black/Gold

project89 03-13-2014 02:32 PM

Re: My Black with blue pearl , with silver pearl stripes, and blue metal flake paint
 
thnx guys its looking good weather and temp wise for this weekend , should start spraying some of the car tommorow , if not deffinatly on saturday/sunday


Originally Posted by carattini (Post 5729746)
It is going to look grate. I'm looking to do the same EFX but with Black/Gold


i almost went with a black base / copper pearl combo , but decided to do the black.blue on the car

when i paint my truck im going to either do a black base/copper pearl or black base/ w fire red pearl

IROCU2 03-13-2014 05:42 PM

Re: My Black with blue pearl , with silver pearl stripes, and blue metal flake paint
 
Love the color.

jamon8 03-13-2014 07:43 PM

Re: My Black with blue pearl , with silver pearl stripes, and blue metal flake paint
 
its cool that you are using spi products. why not use their epoxy

project89 03-13-2014 08:52 PM

Re: My Black with blue pearl , with silver pearl stripes, and blue metal flake paint
 

Originally Posted by jamon8 (Post 5730014)
its cool that you are using spi products. why not use their epoxy

i have a few friends that have used the summit stuff and told me it went on real nice and sanded easily , and it did
i got the primer kit for 100 something bucks with everything and that got me 2 gallons of sprayable primer

project89 03-15-2014 06:25 PM

Re: My Black with blue pearl , with silver pearl stripes, and blue metal flake paint
 
8 Attachment(s)
im having some issues and didnt even paint the engine bay today

anyways i started with 8 grams of pearl on the black base but it wasnt enough

eventually i got upto 35 grams of pearl per sprayable quart of paint
we were testing on my junk iroc hood which honestly wasnt preped very well so it will look like tons of orange peel but we just wanted to get a feel for how much pearl to add

anyways heres some pics

the hood right before we sprayed it
Attachment 338189


black base with 35 grams of pearl per quart and one coat of clear ( indoors in the shade)
it shows up jet black just like it should
Attachment 338190


then we took the hood outside , and it shows up the blue pearl and metalic in it
looks ok from this angle ( not enough pearl yet trying to get a deeper blue when in the sun)
Attachment 338191

then we switch angles and u can see striping everywere
Attachment 338192

then from this side it looks even again
Attachment 338193


anyways i ran out of paint trying to get it right and had a bunch of clear left so i threw some pearl in just the clear and sprayed it over the black primer i love the color but it doesnt give me the color changing effect i want

it looks like its got stripes and squares in it but thats because i sprayed 4 different mixtures of clear and pearl in the same area

upclose so u can see the color
Attachment 338194

and far away so u can see the different mixtures
Attachment 338195

this was the first area i did with the pearl in the clear and then went over it with some small metal flake in the clear , like the effect but the metal flake color was to dark compared to the pearl
Attachment 338196


anyways i have a much more experianced friend comming by so we can see if he can spray without getting any striping , if he can were going to paint the car with the pearl in the black base like the first few pics except go from 35 grams a quart to 50 to bring out the blue more


if we cant get that to spray without striping i will spray the whole car black then mix the pearl in the clear and spray the car the color that u see in the last 3 or so pics since we know we can get that to come out even


maybe somone here can help me figure out why we are getting the stripes in the black base blue pearl mix

project89 03-15-2014 06:31 PM

Re: My Black with blue pearl , with silver pearl stripes, and blue metal flake paint
 
we have tried different overlaps, different air presures , moving faster or slower etc and they just wont go away

it almost seems like the stripes are comming in on the very edge of the spray pattern on both the top and bottom of the spray

the gun has a 1.5 tip in it


and please dont hound me about the organge peel and bad prep i know about it, the hood was a junk hood and was only preped enough to test painting on before i tried to spray the actual car

i can promise u the car will be preped 1000x better

KillaSwagg977 03-15-2014 10:41 PM

Re: My Black with blue pearl , with silver pearl stripes, and blue metal flake paint
 
I'm Goin wit the same color scheme using Barrett Jackson jet black thur Sherman Williams.... keep up the good work

Mirror Image 03-15-2014 10:50 PM

Re: My Black with blue pearl , with silver pearl stripes, and blue metal flake paint
 
I always put the pearl in the base it just works out better that way you can buff the clear out without creating those strips and your problem may be that you are applying wet coats wet coats can create a mottle effect witch can make it look like a stripe or spots with pearl you need to apply medium coats so that they are even
PS they make spray out cards that you can use so you don't use so much material to test your color

project89 03-16-2014 02:12 PM

Re: My Black with blue pearl , with silver pearl stripes, and blue metal flake paint
 

Originally Posted by Mirror Image (Post 5731221)
I always put the pearl in the base it just works out better that way you can buff the clear out without creating those strips and your problem may be that you are applying wet coats wet coats can create a mottle effect witch can make it look like a stripe or spots with pearl you need to apply medium coats so that they are even
PS they make spray out cards that you can use so you don't use so much material to test your color


yeah i burnt up a wuart of black base and a qaurt of clear on that junk hood, we sprayed like 25 different test sections on it.

turns out besides being inexperianced with pearls, the cheap lacquer i was using wasnt holding the pearl powder properly.

i had bought a quart of duplicolor clear and base to practive with not relising that they wouldnt work.

guys on anothe rforum have given me a bunch of tips which will help.on monday im going to my local body shop in town and ill pick up a quart of ppg black and some clear and try again with that.

if i still have issues with the pearl i have another friend who is a painter and we will get him to come down and spray the car for me.im really hoping i can get it myself though.


its a really good feeling when somone asks that u can tell them u did every last bit of work on the car yourself

jamon8 03-16-2014 04:39 PM

Re: My Black with blue pearl , with silver pearl stripes, and blue metal flake paint
 
1 Attachment(s)
you have to spray a little bit faster and overlap 75%

give that a try. and by faster I mean you are spraying light med coats. works best with pearls and metallic

learn how to walk the entire side of the car. you cannot spray pearl or metallic panel by panel. do some practicing because laying down a pearl paint job takes GREAT BALLS

Mirror Image 03-16-2014 06:36 PM

Re: My Black with blue pearl , with silver pearl stripes, and blue metal flake paint
 

Originally Posted by project89 (Post 5731482)
yeah i burnt up a wuart of black base and a qaurt of clear on that junk hood, we sprayed like 25 different test sections on it.

turns out besides being inexperianced with pearls, the cheap lacquer i was using wasnt holding the pearl powder properly.

i had bought a quart of duplicolor clear and base to practive with not relising that they wouldnt work.

guys on anothe rforum have given me a bunch of tips which will help.on monday im going to my local body shop in town and ill pick up a quart of ppg black and some clear and try again with that.

if i still have issues with the pearl i have another friend who is a painter and we will get him to come down and spray the car for me.im really hoping i can get it myself though.


its a really good feeling when somone asks that u can tell them u did every last bit of work on the car yourself

PPG make good paint I would put the pearl in the base spray the base then clear and something else I would go light to medium on the 1st coat of clear if you spray a heavy coat on the first coat you can also have spots or strips you can add hardener in the base to help keep the peal in place when you clear

project89 03-18-2014 03:12 PM

Re: My Black with blue pearl , with silver pearl stripes, and blue metal flake paint
 
im not even going to try again even though we identified and fixed the issue we were having.
i just got back from my local body shop and as long as i have the car fully preped and ready to go including masked off they will spray it for 250$'s
i think that prices is worth it alone just for the fact the car will be in a real paint booth not the homemade one we made

instead of custom mixing my paint i just ordered a whole kit of midnight blue pearl which should be close to what i was going for


All times are GMT -5. The time now is 10:07 PM.


© 2024 MH Sub I, LLC dba Internet Brands