![]() |
Rear window louver install info needed I have the factory louvers for my 88, hardware in a box for the last 6 or 8 years. Have to park out of the garage for a while so I need to put them back on. Hardware is mostly easy to figure out, front and rear, but the side brackets are a little bit different. Two have a 1/4 inch or so extension toward the center of the car. Do these go in the forward or rearward position? Also the rear pieces have a white plastic layer, is this just a pad of sorts or a double sided adhesive deal? |
Re: Rear window louver install info needed Figured it out. The side brackets are labeled FSB and RSB, front side bracket, etc. Looks like the rear brackets would need emblem tape to stick to the glass. Sure a different look than I'm used to. |
Re: Rear window louver install info needed Super easy install. 2 steps to it. Step one- find nearest industrial waste bin Step two- Chuck that ugly pos in there. Hope that helps. |
Re: Rear window louver install info needed Well if you ever need the original louver install instructions here they are for ya. http://i58.tinypic.com/23lhann.jpg http://i58.tinypic.com/dw6ykw.jpg http://i58.tinypic.com/2s9r9ue.jpg http://i61.tinypic.com/6jhgjk.jpg |
Re: Rear window louver install info needed
Originally Posted by visitor
(Post 5792022)
Super easy install. 2 steps to it. Step one- find nearest industrial waste bin Step two- Chuck that ugly pos in there. Hope that helps. |
Re: Rear window louver install info needed Just stumbled upon this thread. Thanks for posting the original mounting instructions. |
Re: Rear window louver install info needed any place to pick up new hardware? I seem to have lost mine. |
Re: Rear window louver install info needed And while we are at it, does anyone know where to get replacement dzus fasteners? When I bought my louvers, they didn't come with the fasteners but had the hardware. I don't know what size they are and have ordered the wrong size before! They aren't cheap to keep guessing! |
Re: Rear window louver install info needed I bought these from CircleTrackSupply. PanelFast -DZUS Fastners 5/16" STEEL UNDERCUT ALLEN (HEX) BUTTONS TYPE: PANBU5500- 5/16in. OVAL HEAD STEEL .500in Silver instead of black, takes a larger hex than factory, and at 0.500" they have a longer reach. With a washer/spacer fastened to the bracket to make thing taught, they might be fine, as my louver-to-bracket has a natural gap there anyway. They do have a 0.450" option available, which will go toward closing up the gap the 0.500's have. Shipping is expensive. |
Re: Rear window louver install info needed subscribed I just got a set in need of fastners and hardware |
Re: Rear window louver install info needed Honestly I like the rear window louvers. I got a reproduction set from Classic and they fit perfectly. https://cimg9.ibsrv.net/gimg/www.thi...22c9da836a.jpg To each their own I guess. |
Re: Rear window louver install info needed Reproduction hardware or louvers ? |
Re: Rear window louver install info needed I used to hate louvers. Then i got a car with an oem set. Now i like em. Lol https://cimg0.ibsrv.net/gimg/www.thi...1dbeeed0ae.jpg |
Re: Rear window louver install info needed Reproduction everything. The hardward and the louvers. 6 |
Re: Rear window louver install info needed
Originally Posted by bryan623
(Post 6046913)
Honestly I like the rear window louvers. I got a reproduction set from Classic and they fit perfectly. https://cimg9.ibsrv.net/gimg/www.thi...22c9da836a.jpg To each their own I guess. |
Re: Rear window louver install info needed
Originally Posted by Rednecht
(Post 5794166)
Well if you ever need the original louver install instructions here they are for ya. https://i58.tinypic.com/23lhann.jpg https://i58.tinypic.com/dw6ykw.jpg https://i58.tinypic.com/2s9r9ue.jpg https://i61.tinypic.com/6jhgjk.jpg |
Re: Rear window louver install info needed |
Re: Rear window louver install info needed
Originally Posted by Rednecht
(Post 5794166)
Well if you ever need the original louver install instructions here they are for ya. https://i58.tinypic.com/23lhann.jpg https://i58.tinypic.com/dw6ykw.jpg https://i58.tinypic.com/2s9r9ue.jpg https://i61.tinypic.com/6jhgjk.jpg |
Re: Rear window louver install info needed
Originally Posted by 92camaro32
(Post 6466640)
Do you have these instructions so you can send them to me studbrucebaker@yahoo.com |
All times are GMT -5. The time now is 10:54 PM. |
© 2024 MH Sub I, LLC dba Internet Brands