Front caliper bleeder screw size Hi there ! The bleeder screws of the front calipers of my 1988 350 ci Iroc-Z are dead. Could someone please tell me their size, so that I can buy new ones ? Thansk in advance for your answers ! ;) |
Re: Front caliper bleeder screw size 10mm/1.5 |
Re: Front caliper bleeder screw size Thanks a lot for your help ! As this is a metric screw, I guess it should'nt be a problem for me to find these ;) |
Re: Front caliper bleeder screw size .its only a problem when bleeding the rear brake on that side..makes a mess.. what I did with all the work I put in on mine. was mark and drill a hole in the 2 plates. to run the tube over the end of the bleeder.. 1st plate is the one you see the 2nd plate is at a angle on the under side..I only did this to keep things clean. when putting the car back together..and setting the rear brakes back on the car.. but on a side note..the outer plate was never a issue.. https://i.postimg.cc/63MTvKGx/20160730-165925.jpg https://i.postimg.cc/vTTyfz8B/20160730-165636-0.jpg the last thing I wanted was blake fluid spashing all over.. https://i.postimg.cc/d1J9YBz2/20150724-185311.jpg https://i.postimg.cc/x8D71zRs/wheel.jpg |
All times are GMT -5. The time now is 04:51 AM. |
© 2024 MH Sub I, LLC dba Internet Brands