Third Generation F-Body Message Boards

Third Generation F-Body Message Boards (https://www.thirdgen.org/forums/)

- Brakes (https://www.thirdgen.org/forums/brakes/)

- - Line lock install (https://www.thirdgen.org/forums/brakes/758687-line-lock-install.html)

IROCZ1989

01-26-2019 04:38 AM

Line lock install

Any photos out there on an install? Mounting? Dont really want to screw the solinoid to the strut tower. Looking for clean install pics. Thanks

articwhiteZ

02-22-2019 02:21 PM

Re: Line lock install

I found this pic in my photos..it shows 1 way..note line lock on firewall above brake booster.. I know I have better shots..ill look.. mine is on frame bolted to strut tower
https://i.postimg.cc/fywYkS3w/3.jpg
this is the only one I have seen like this..
https://i.postimg.cc/sXMr6xC5/33.jpg
I did mine when the car was new..1991/92. I used a hurst Unit..but U had to Fab my Lines from scratch..
this way..its not bolted to the strut tower..

Aviator857

02-22-2019 03:31 PM

Re: Line lock install

if it can be mounted sidways alot of people mount it under the master and anchor it to the same bracket as the prop valve.

seiplentz

02-28-2019 04:38 PM

Re: Line lock install

Heres mine. I think it looks clean with custom bent lines.

https://cimg0.ibsrv.net/gimg/www.thi...0d285bbaa7.jpg

articwhiteZ

02-28-2019 06:55 PM

Re: Line lock install

I have mine Mounted about the same way..on the side of the tower..

All times are GMT -5. The time now is 12:43 AM.