|
FS: 1985 Twin Turbo Camaro (will part out also) Well, I'm looking to get a C6 Vette so my baby has to go. Asking price is $18,000. For an interested buyer a $1000 deposit, I will have the car repainted white to fix some small dings. This car is perfect, unique and has top-of-the-line fabrication. You can drive it in 98* weather, in traffic, on the highway without overheating. Runs on E85 or you can convert back to super-unleaded by sending the carb back to CSU and paying a small fee. (run E85, it rocks). Lots of fabrication went into this car, dash is NOT STOCK. It has been fabricated also and looks BEAUTIFUL! I know I'm going to forget some things so I'll update as I remember. All parts are aftermarket, no junk. The specs: 1985 Camaro Z28, 700hp Engine: 406 SBC Dart block Eagle 6" Rods w/L19 Rod bolts Eagle 4340 Crankshaft JE Turbo pistons 9:1 CR Pro-Topline 235cc heads, w/Pro-Magnum Roller rockers CompCams Valvetrain Ferrea Valves Doug Herbert Solid Roller cam (specs given to buyer) Proform Electric Water pump Victor Jr. Intake Hellfire file-to-fit rings ARP everything Cooling: Griffin 4-core aluminum radiator Derale 4000 CFM fans Derale Transmission cooler with fan 100 AMP alternator Interior: Two Padded racing seats w/restraints/harness All black carpet, VERY clean 8 point roll cage Autometer Phantom Gauges to monitor EVERYTHING. LM1 + Auxbox to monitor wideband, boost, voltage and whatever else you want Hurst Pistol Grip shifter Turbo Kit/Induction: Twin Master Power T-70 P-trim turbos Turbo kit fabricated by Mosmeyer Performance all hotside/coldside coated by Cradin Industries Two TiAL 38mm wastegates TiAL Blow off Valve Holley 850HP CSU Carb, freshened by CSU, converted to E85 CSU Blowthru Hat Snow performance Stage 2 Water/Methanol injection kit ALL lines are BRAIDED LINES for oil return, oil feed, boost reference etc..none of that cheap rubber crap. ALL fittings are AEROQUIP AN fittings. Fuel System: Aeromotive A1000 fuel pump Aeromotive Boost referenced fuel pressure regulator has original gas tank Ignition: MSD 6A-BTM MSD 2 Step MSD 85551 Distributor MSD 8.5mm plug wires Transmission/Drivetrain: TH400 transmission by "Transmissions by Lonnie" built to withstand 1500# torque, reverse manual valve body Ford 9" backbraced Custom drive shaft Custom fabricated traction bar setup Detroit Locker 3.90 gears Strange axles Strange Yoke Tires/Wheels: Mickey Thompson ET Drag Rims w/skinnies/drag radials I will post pics of the inside after my camera finishes charging.. https://img525.imageshack.us/img525/...o022807yb4.jpg https://img411.imageshack.us/img411/...nturbo2oy2.jpg |
Re: FS: 1985 Twin Turbo Camaro (will part out also) sent you a pm Your white car looks like a clone of mine from the hood to how your kit is built :thumbsup: |
Re: FS: 1985 Twin Turbo Camaro (will part out also) replied |
Re: FS: 1985 Twin Turbo Camaro (will part out also) engine and tranny setup pending to me :) |
Re: FS: 1985 Twin Turbo Camaro (will part out also) nice talkin to you man.. glad its going to another 3rd Gen owner! :-) === Willing to sell the Camaro as a roller, no motor/tranny (sale pending), no ignition for $5000. For $5000 you get one hell of a car. Just put your motor, ignition box, tranny and go racing or driving. |
Re: FS: 1985 Twin Turbo Camaro (will part out also) |
Re: FS: 1985 Twin Turbo Camaro (will part out also) turbo kit SOLD |
Re: FS: 1985 Twin Turbo Camaro (will part out also) pretty much all that is left is the roller. Someone has got to be looking for a bad *** roller that can hold up to ALOT of HP!!! $5000 one hell of a deal!! |
Re: FS: 1985 Twin Turbo Camaro (will part out also) come on.. nobody wants a bad *** roller? its better than the other rollers being advertised on here by far. |
Re: FS: 1985 Twin Turbo Camaro (will part out also) Would you like to sell the rad and fans? If so what would you like shipped to 51503? |
Re: FS: 1985 Twin Turbo Camaro (will part out also)
Originally Posted by 383GTA1989
(Post 3932991)
Would you like to sell the rad and fans? If so what would you like shipped to 51503? The radiator is: http://tinyurl.com/5q54h4 The derale fans are: http://tinyurl.com/6xnw5r I'll take $300 + $35 shipping. |
Re: FS: 1985 Twin Turbo Camaro (will part out also) That include the cap and the rad mount on top? ---------- Also, how about the rear spoiler? |
Re: FS: 1985 Twin Turbo Camaro (will part out also) yes I will throw in the cap and the upper bracket. sorry, wont take parts off the body of the car. |
Re: FS: 1985 Twin Turbo Camaro (will part out also) Do the fans have everything needed to run them, relay and therm? Also what payment method do you prefer? Paypal has been good to me. -Thanks, Seth |
Re: FS: 1985 Twin Turbo Camaro (will part out also) wish you wernt so far away. i could use a roller like this, give me a reason to build a nother motor.. |
Re: FS: 1985 Twin Turbo Camaro (will part out also) ok. I sold the MT ET Drag rims/tires and am putting on brand new Weld Prostars. $4000 gets the entire roller WITHOUT the fuel system, ignition and cooling system. |
Re: FS: 1985 Twin Turbo Camaro (will part out also) ok, sale pending on the radiator and dual derale fan setup. I will update this ad with the pics of the car w/Weld Prostars on it. |
Re: FS: 1985 Twin Turbo Camaro (will part out also) pm sent |
Re: FS: 1985 Twin Turbo Camaro (will part out also) DId you Sell the engine? |
Re: FS: 1985 Twin Turbo Camaro (will part out also) yes, engine/tranny is sold and is being shipped tomorrow. The radiator and derale fan is sold also and is going out by Thurs/Friday this week. After reviewing what I have, I'll end up selling it for $4500 instead of $4000.. just too much parts/fabricatin in this. Definitely worth every penny. I'll have to update this ad with new pics of the car etc. |
Re: FS: 1985 Twin Turbo Camaro (will part out also) Any luck shipping the rad and fans? Thanks, Seth |
Re: FS: 1985 Twin Turbo Camaro (will part out also) Has anyone heard from this guy. Sent payment and no response..... -Seth |
Re: FS: 1985 Twin Turbo Camaro (will part out also)
Originally Posted by 383GTA1989
(Post 3947431)
Has anyone heard from this guy. Sent payment and no response..... -Seth -Alex |
Re: FS: 1985 Twin Turbo Camaro (will part out also) Thanks for the reply man. I was getting a little nervous. You have all my info you need correct? |
Re: FS: 1985 Twin Turbo Camaro (will part out also) if your address is correct in paypal then I have the info. |
Re: FS: 1985 Twin Turbo Camaro (will part out also) Interested in selling the gauges? |
Re: FS: 1985 Twin Turbo Camaro (will part out also)
Originally Posted by WIll36
(Post 3954430)
Interested in selling the gauges? ---------- ok, i'll take $3500 for the car. no cooling system, no ignition box, no fuel system. has weld pro-stars on it. I have the centercaps just not installed. shifter and gauges, rear end setup etc is still in there/all the same specs. |
Re: FS: 1985 Twin Turbo Camaro (will part out also) Definetly interested could you pm me a list of the gauges and which ones are what size? I'm assuming that the tach and speedo are 5" and the other are 2 1/16" but just want to be sure |
Re: FS: 1985 Twin Turbo Camaro (will part out also) everything SOLD but the Autometer Phantom gauges. $500 for all 9. 5" tach 5" speedo water temp oil temp trans temp oil pressure fuel pressure (w/isolator) fuel level voltage |
| All times are GMT -5. The time now is 02:56 PM. |
© 2024 MH Sub I, LLC dba Internet Brands