Third Generation F-Body Message Boards

Third Generation F-Body Message Boards (https://www.thirdgen.org/forums/)
-   Carburetors (https://www.thirdgen.org/forums/carburetors/)
-   -   Carburetor Exploded Diagrams (https://www.thirdgen.org/forums/carburetors/413673-carburetor-exploded-diagrams.html)

Apeiron 03-17-2007 10:45 PM
Carburetor Exploded Diagrams
 
A few things I've been meaning to post for a while.

Apeiron 03-17-2007 10:47 PM
Rochester Quadrajet E4ME
 
3 Attachment(s)
Factory CCC 4bbl carb, 82-87 LG4 & L69.

Apeiron 03-17-2007 10:49 PM
Rochester Quadrajet M4ME
 
3 Attachment(s)
Factory non-CCC 4bbl carb, 82-87 LG4 "Export"

Apeiron 03-17-2007 10:53 PM
Rochester Varajet E2SE
 
3 Attachment(s)
Factory CCC 2bbl carb, 82-83 LQ8 and LC1

Apeiron 03-18-2007 08:23 PM
Holley 4150/4160
 
3 Attachment(s)
Aftermarket 4bbl Square Flange

Apeiron 03-18-2007 08:30 PM
Holley 4500
 
2 Attachment(s)
Aftermarket 4bbl Dominator Flange

Apeiron 02-06-2008 09:29 PM
Edelbrock Performer Series / Carter AFB
 
3 Attachment(s)
Aftermarket 4bbl Square Flange

Some differences may exist between recent-production AFBs and old OEM units.

Edelbrock Thunder Series AVS is similar.

Apeiron 02-06-2008 09:33 PM
Carter AVS
 
2 Attachment(s)
Carter AVS, 60's Vintage OEM 4bbl Square Flange, for comparison with Edelbrock AVS

1. Step up piston cover screw (2)
2. Step up piston cover plate (2)
3. Step up piston and rod assy. (2)
4. Vacuum piston spring (2)
5. Fuel inlet fitting
6. Fuel inlet fitting gasket
7. Fuel inlet fitting screen
8. Pin spring (small)
9. Retainer
9a. Pin spring (large)
10. Washer
11. Diaphragm link
12. Throttle connector rod
13. Fast idle rod
14. Pump arm screw
15. Vent arm spring
16. Vent arm
17. Vent valve
18. Pump arm
19. Pump link
20. Air horn screw (8)
21. Solenoid bracket screw (2)
22. Solenoid and bracket
23. Air horn assembly
24. Float lever pin (2)
25. Float (2)
26. Needle and seat assy. (2)
27. Air horn gasket
28. Pump plunger
29. Pump plunger spring
30. Pump intake check
31. Primary venturi screw (4)
32. Primary venturi vent seal (2)
33. Primary venturi (s)
34. Primary ventuti gasket (2)
35. Pump jet screw (2)
36. Pump jet housing
37. Pump jet gasket
38. Pump discharge check needle
39. Primary jet (2)
40. Secondary jet (2)
41. Compensator valve screw (2)
42. Compensator valve
43. Compensator valve gasket
44. Idle mixture screw and spring (1968, early 1969)
45. Idle mixture screw and soring (2)
46. Idle limiter cap (2)
47. Diaphragm and bracket screw (2)
48. Diaphragm and bracket
49. Diaphragm suction hose
50. Throttle speed screw

Apeiron 02-06-2008 09:38 PM
Carter Thermoquad
 
2 Attachment(s)
Aftermarket (9800 series similar to OEM version shown here) 4bbl Spread Flange

Sadly, no longer in production. (This one's for you, Vader.)


All times are GMT -5. The time now is 06:14 PM.


© 2024 MH Sub I, LLC dba Internet Brands