VSS input for 7730 ECM a short question: at the 1227730 ECM with 8D (running a TPI) I usually have the VSS directly connected to the ECM, and the ECM supplies the output signal for the speedo (basically the ECM has the function of former VSS Buffers) Now i have a 89 Van with mechanical speedo and a speed-sensor attached to the speedo, which supplies a brown speed output wire to this Van's factory TBI-ECM. Is there a way to use this signal at the TPI-ECM? it would safe me a lot of time because otherwise I would have to get a new VSS. |
Re: VSS input for 7730 ECM They used that computer in different applications with an optical sensor. Connect that brown wire to C6 on the computer. and disregard the B9&B10 |
Re: VSS input for 7730 ECM That will work but you must be able to reprogram the chip. Option word 3 at $8018, bit 6 must be cleared to enable to optical input. |
Re: VSS input for 7730 ECM thank you guys, that's great I'm using Tunercat for programming, can this option be set there too? |
All times are GMT -5. The time now is 04:35 PM. |
© 2024 MH Sub I, LLC dba Internet Brands