clear flood logic Can anyone tell me how the clear flood logic works in the 8746? I'm curious as to what the general operation, triggers, filters, timers, etc. |
Nothing fancy, while the engine is not running if the TPS% exceeds a calibration term the desired AFR is set toa lean value (another cal term). In ANLU the TPS% threshold is 80% and the desired AFR is 20:1. So, while cranking, if the TPS is >= 80% then the AFR is set to 20:1. RBob. |
Thank you sir... |
All times are GMT -5. The time now is 08:17 AM. |
© 2024 MH Sub I, LLC dba Internet Brands