False knocks Hi folks Im running a EBL P4 its a great system. i do however have a problem with false knocks. I am thinking im going to swap knock sensors, as i understand it the LT4 sensor is less sensitive correct? I have searched and found old posts that state there is a knock sensor and a knock modual , could someone please explain the difference? part numbers? from 3500 on up im getting a bunch of false knock ...i pulled 10 * and the knock is still there , so i assume its just false. thanks in advance for any and all replies. |
Re: False knocks Careful not to have the knock sensor over tightened. That can cause problems too. |
Re: False knocks You want the LT4 knock module.IIRC,the sensors are the same.The module is different. |
Re: False knocks thx for the replies, do you folks have the part number for the modual? i just swapped a much tamer spark table in and did a quick test ... same kind of knock retard.. i want to swap moduals to see if it is truely false knock , thx |
Re: False knocks I'm not sure why the L98 5.7 knock sensor isn't working for you. Ironically, I'm running that very L98 sensor with LT4 spark table without any issues. Unfortunately I don't the LT4 knock sensor p/n. But if you go to http://parts-catalog.acdelco.com/cat...log_search.php you can probably navigate your way to it. Another good source would be gmpartsdirect.com. |
Re: False knocks thx ... im going to check out the LT4 spark table, maybe mine is just too hot for the combo im running. |
Re: False knocks See my miniram start bin thread. I have it posted there. |
Re: False knocks Ultma8z , i dont have office to down load it, do you or anyone else, have a spark table from a LT4 that i just could insert into tuner pro , and give it a try? thx sean |
Re: False knocks The part # I have for the LT4 module is #16214681. |
All times are GMT -5. The time now is 07:19 PM. |
© 2024 MH Sub I, LLC dba Internet Brands