Third Generation F-Body Message Boards - Starter Hookup, & Distribuitor

Third Generation F-Body Message Boards (https://www.thirdgen.org/forums/)

- Electronics (https://www.thirdgen.org/forums/electronics/)

- - Starter Hookup, & Distribuitor (https://www.thirdgen.org/forums/electronics/244956-starter-hookup-distribuitor.html)

Starter Hookup, & Distribuitor

Okay... two questoins... and please forgive me, this is the first time i've swapped an engine.. . i forgot to lable a couple of things...

I had to get a starter off of an 86 chevy truck because the flywheel i got to replace the one that broke on my 700r4 was a little larger, and i needed the offset starter... first of all, I'm not sure what other wire i need to hook up to the starter... is one of these it? I'm pretty sure the one with 2 red wires is to go to ground...
http://www.publikshoppe.com/images/ebay/1.jpg

Secondly, i got a Mallory Unilite Distrib, and Coil to replace the distrib i had that was put together using pieces of dead ones (Frankin-distribuitor). any sugguestions on how i can wire this? it came with instructions, but they aren't that well written...

http://www.publikshoppe.com/images/ebay/2.jpg

also, do i need this thing for the distrib hook up?
http://www.publikshoppe.com/images/ebay/3.jpg

again, i'm sorry... i've never done this before, and electrical is NOT my strong suit!!!!!

Thanks
Pete

oh, one more thing, with the starter... the new one i got has 2 of the smaller hookups. (the large is for POS from the battery, the small is a switch?) but yea, there are two of them, anyone know which i need to hook it upto, or does it matter?

and with just the POS from the starter being hooked up, should i be able to turn my raido on and interrior lights? caus nothing else works, even headlights...

Pete