Third Generation F-Body Message Boards

Third Generation F-Body Message Boards (https://www.thirdgen.org/forums/)
-   Electronics (https://www.thirdgen.org/forums/electronics/)
-   -   82-88 tach fix (https://www.thirdgen.org/forums/electronics/687419-82-88-tach-fix.html)

rusty vango 08-21-2013 04:09 PM

82-88 tach fix
 
does anyone know how to fix the tach on a 82-88 Camaro?? I found the write up on the later style but im working on a 86:(

zenish 08-21-2013 07:26 PM

Re: 82-88 tach fix
 

Originally Posted by rusty vango (Post 5623027)
does anyone know how to fix the tach on a 82-88 Camaro?? I found the write up on the later style but im working on a 86:(

did you read it?i used it to fix my 1989 tach.

mreld3r 08-22-2013 07:56 AM

Re: 82-88 tach fix
 
Yes; it will work on MOST model tach's.
I have fixed 3 various year model tach's.
I have an easier way though. When I get home i will take pics.
It involves tracing the wires from the Resistor-Pack to the edge of the board;
where there is MUCH more room to solder a resister.
Just clip the leads of the chip and trace the PCB-traces over to the side.
Scratch the coating off of the trace and solder correct resistor there.
mike

mreld3r 08-22-2013 07:59 AM

Re: 82-88 tach fix
 
tach board looks different for earlier models; but the same FIX works.

rusty vango 08-23-2013 08:18 AM

Re: 82-88 tach fix
 

Originally Posted by mreld3r (Post 5623347)
tach board looks different for earlier models; but the same FIX works.

excellent!! its off to the TV repair shop with my cluster..BUT!!! according to my FSM theres a" tach filter" if its bad .what are the symptoms? does anyone know the values? are they available from GM?:blah:

mreld3r 08-24-2013 09:01 AM

Re: 82-88 tach fix
 
Sorry, dont have a clue bout the filter.
All 3 of the ones i fixed were the same problem.
Resister pack
symptoms: tach pegs; or tach is wildly reading high
All 3 were the resistor in my case.
mike
BTW...all 3 were older tachs in my case.
one '89, and 2 '86

gcj280 12-19-2013 10:18 AM

Re: 82-88 tach fix
 
I can sell you one i fixed for $45 + core. I do a professional job and I also replace the capacitors and carbon resistors that can cause a tach to malfunction.

thanks, Greg

austinrods 12-19-2013 10:58 AM

Re: 82-88 tach fix
 

Originally Posted by gcj280 (Post 5683961)
I can sell you one i fixed for $35 + core. I do a professional job and I also replace the capacitors and carbon resistors that can cause a tach to malfunction.

thanks, Greg

Greg, send me your contact info please.
Thank you Allen

dcurles 08-11-2014 02:08 PM

Re: 82-88 tach fix
 

Originally Posted by gcj280 (Post 5683961)
I can sell you one i fixed for $35 + core. I do a professional job and I also replace the capacitors and carbon resistors that can cause a tach to malfunction.

thanks, Greg

do you have any more for sale. I need one for an 88, 5.7 car.

dcurles 08-11-2014 02:13 PM

Re: 82-88 tach fix
 

Originally Posted by gcj280 (Post 5683961)
I can sell you one i fixed for $35 + core. I do a professional job and I also replace the capacitors and carbon resistors that can cause a tach to malfunction.

thanks, Greg

do you have any more for sale. I need one for an 88, 5.7 car.

gcj280 08-13-2014 07:16 AM

Re: 82-88 tach fix
 

Originally Posted by dcurles (Post 5804148)
do you have any more for sale. I need one for an 88, 5.7 car.


PM Sent.

88blueiroc 08-25-2014 08:36 AM

Re: 82-88 tach fix
 
Greg, please send me your contact info, I would like to buy one of your tachs. Thanks

88blueiroc 08-29-2014 07:52 AM

Re: 82-88 tach fix
 
Greg, please send me a PM with your contact info, I would like to purchase a tach, if you have any left, thanks.

gcj280 09-02-2014 08:06 AM

Re: 82-88 tach fix
 
PM Sent

silverstang84 09-05-2014 10:18 PM

Re: 82-88 tach fix
 
Hey guys, I'm also interested in buying a repaired tach. Please message me for info. It's for my 86.

kyle2921 03-09-2015 09:11 PM

Re: 82-88 tach fix
 
do you have any more tach have 84 Camaro with 350 v-8

gcj280 03-11-2015 07:33 AM

Re: 82-88 tach fix
 

Originally Posted by kyle2921 (Post 5888123)
do you have any more tach have 84 Camaro with 350 v-8

I have temporarily run out of spare tachs. But feel free to send me yours for repair. PM me for details.

thanks, Greg

Buloushie 05-12-2015 11:41 AM

Re: 82-88 tach fix
 
Could you send me your info I would like to get my tach fixed

Animosity86 08-04-2015 06:53 AM

Re: 82-88 tach fix
 

Originally Posted by Buloushie (Post 5915333)
Could you send me your info I would like to get my tach fixed

Don't deal with Buloushie, This scum bag ripped me off. Hes going to take the money that he stole from me and buy a part from you. If he even pays you. This is fair warning for anyone dealing with this piece of sh*t.

gcj280 01-05-2017 10:15 AM

Send me a pm if you need your tach repaired or text me 318-402-1244.

Thanks, Greg

KCG 10-12-2017 08:37 AM

Re: 82-88 tach fix
 

Originally Posted by gcj280 (Post 5683961)
I can sell you one i fixed for $45 + core. I do a professional job and I also replace the capacitors and carbon resistors that can cause a tach to malfunction.

thanks, Greg

Are you still offering this repair?

Any members here have any feedback from past repairs?

gcj280 10-12-2017 11:14 AM

Re: 82-88 tach fix
 
I have brand new circuit boards for 82-92 camaro tachometers. $50 shipped.

KCG 10-12-2017 11:50 AM

Re: 82-88 tach fix
 

Originally Posted by gcj280 (Post 6175865)
I have brand new circuit boards for 82-92 camaro tachometers. $50 shipped.

You've created your own replacement board with new components?
Could you post a pic please? I'm sure several would be interested in seeing it.
Thanks

gcj280 10-12-2017 01:24 PM

Re: 82-88 tach fix
 

Originally Posted by KCG (Post 6175884)
You've created your own replacement board with new components?
Could you post a pic please? I'm sure several would be interested in seeing it.
Thanks

Yes I have. I'll post pics soon.
https://cimg1.ibsrv.net/gimg/www.thi...4e331c44fb.jpg
https://cimg4.ibsrv.net/gimg/www.thi...9ab5850637.jpg

KCG 10-12-2017 03:09 PM

Re: 82-88 tach fix
 
Mine is an '89 and looks like this


https://cimg4.ibsrv.net/gimg/www.thi...2ba94b65a2.jpg

gcj280 10-13-2017 03:24 PM

Re: 82-88 tach fix
 
1 Attachment(s)
Here is the new one for an 82-89 camaro.

KCG 10-13-2017 04:07 PM

Re: 82-88 tach fix
 
Looks good! Hows the success rate?
Sending pm.

gcj280 10-13-2017 08:15 PM

Re: 82-88 tach fix
 

Originally Posted by KCG (Post 6176164)
Looks good! Hows the success rate?
Sending pm.

I’ve sold about 900 and have only had one or two failures. Most likely due to an accidental short by the installer. I calibrate them on my test bench, but some may need slight adjustment. I build in a potentiometer for fine adjustment. It comes with alifetime warranty.

StansFBM 11-10-2017 08:30 PM

Re: 82-88 tach fix
 
gcj280, sent PM also :)

StansFBM 11-17-2017 06:50 PM

Re: 82-88 tach fix
 

Originally Posted by gcj280 (Post 6176202)
I’ve sold about 20 without a single complaint. I calibrate them on my test bench, but some may need slight adjustment. I build in a potentiometer for fine adjustment. It comes with a 1 year warranty.

Hi Greg, I installed the one you sent me, but had some questions.... PM’d ya ;)

StansFBM 11-22-2017 02:27 PM

Re: 82-88 tach fix
 
BTW, circuit board is awesome and got my Tach working for the first time in years...

IROC86CAM 07-17-2018 06:46 PM

Re: 82-88 tach fix
 
Are you still fixing tachs? Need 86 fixed

Project1988iroc 12-01-2018 01:15 PM

Re: 82-88 tach fix
 

Originally Posted by mreld3r (Post 5623344)
Yes; it will work on MOST model tach's.
I have fixed 3 various year model tach's.
I have an easier way though. When I get home i will take pics.
It involves tracing the wires from the Resistor-Pack to the edge of the board;
where there is MUCH more room to solder a resister.
Just clip the leads of the chip and trace the PCB-traces over to the side.
Scratch the coating off of the trace and solder correct resistor there.
mike

what size resistor do I need and where do I put it. My tach pegs out 88 iroc

Jeepwrangler 10-15-2019 08:54 AM

Re: 82-88 tach fix
 

Originally Posted by gcj280 (Post 6176202)
I’ve sold about 100 without a single complaint. I calibrate them on my test bench, but some may need slight adjustment. I build in a potentiometer for fine adjustment. It comes with lifetime warranty.

Could you seed me your contact information I need a tac or have mine fixed it's a 1987 irock 5.7L thank you

gcj280 10-16-2019 08:24 AM

Re: 82-88 tach fix
 
Sure thing.
Greg Johnson 318-402-1244
website: www.cajuntachshop.com
email: cajuntachshop@yahoo.com

Thanks! Greg

shuffZ 01-20-2020 01:15 PM

Re: 82-88 tach fix
 
Not to dig up an old thread but I'm having problems with my 83 Z28 tach. I have two clusters and both of them peg the tach if i plug in the white wire at the HEI coil. Original cluster was a mess so i ordered a used one off ebay and everything else works now. But same results with tach. Seller says tach was confirmed working.... Sounds like this is the fix. I checked out your website and the replacement boards look awesome. The car was originally cross fire, now carb 350 with HEI coil in cap distributor if that changes anything.

gcj280 01-22-2020 11:00 AM

Re: 82-88 tach fix
 
Hi ShuffZ. Thanks! This is a very common problem with these tachometers unfortunately. My replacement circuit board should fix your tachs and they come with a lifetime warranty. I will give you a discount for 2 boards or we can work out a trade deal if you don't want both tachs. Just let me know. Give me a call or text when you are ready.

Thanks! Greg
318-402-1244

earthwormtimmy 02-16-2020 01:38 PM

Re: 82-88 tach fix
 
Hi, I've had trouble the rev counter, the other gauges jumping and live in the UK. Would you / do you ship to UK?

gcj280 02-18-2020 01:43 PM

Re: 82-88 tach fix
 

Originally Posted by earthwormtimmy (Post 6354663)
Hi, I've had trouble the rev counter, the other gauges jumping and live in the UK. Would you / do you ship to UK?

Absolutely, I can ship USPS first class, but it takes about a month at least. If you want to pay a little more for shipping, I can do Priority International. (I prefer it btw)

Thanks! Greg

885speed 02-18-2020 02:11 PM

Re: 82-88 tach fix
 
For anyone who may be hesitating to pick up the Cajun Tach Shop board, don't.
Put one in my car, and am SUPER pleased to not only have my tach be correct for the first time since I've owned it in 13 years, but it was also dead accurate right out of the box.


@gcj280
Do you have any intentions of expanding to repairs/calibrations of other gauges on these cars or even others?

Geoff Stellini 03-29-2020 05:59 AM

Re: 82-88 tach fix
 

Originally Posted by gcj280 (Post 6176157)
Here is the new one for an 82-89 camaro.

Hi could you provide me with a quote for a board for my 1988 Camaro as I am in Australia, Melbourne.
Thanks

Geoff


All times are GMT -5. The time now is 04:18 PM.


© 2024 MH Sub I, LLC dba Internet Brands