Third Generation F-Body Message Boards - New build no ignition power

Third Generation F-Body Message Boards (https://www.thirdgen.org/forums/)

- Electronics (https://www.thirdgen.org/forums/electronics/)

- - New build no ignition power (https://www.thirdgen.org/forums/electronics/759883-new-build-no-ignition.html)

seiplentz

03-24-2019 09:22 PM

New build no ignition power

So I just redid my entire engine bay and Im ready to fire up my new engine. I have no ignition power. No chime when I insert the key and no power on the pink wires to the ECM. What did I do? I have power on the Hots and power at the blower box reds. What did I miss? All wiring from engine bay was removed for paint. I have a dome light and dash lights work. I did not wire in the front headlight harness yet.

sofakingdom

03-26-2019 06:36 AM

Re: New build no ignition power

Sounds like one of the fusible links at the starter isn't hooked up, or has failed. One works, the other does not.

seiplentz

03-26-2019 07:54 AM

Re: New build no ignition power

I found it.. I think I had a loose connection at the firewall bulkhead connector. I pulled it off to check pins and all is good now..

All times are GMT -5. The time now is 04:56 PM.