Turn signals stopped working I have an 84' Z28, and my turn signals (inside and outside) stopped working all of a sudden. I could use some help trouble shooting the problem! |
Re: Turn signals stopped working I'm going to assume you replaced the fuse already. Probably needs a flasher. It's not the one on the fuse block. That one is for the hazards only. There's another in/near the "convenience center", which is the little tray kind of thing that the diagnostic connector is mounted to, for the TS. |
Re: Turn signals stopped working I haven't done anything to it, because I don't know what to look for. Any recommendations on a "how to" video would be greatly appreciated! |
Re: Turn signals stopped working the flashers can be 2 prong for 4-way flasher or 3 prong for signal lights, if i remember correctly. Years ago I replaced both flashers on my Buick GS |
Re: Turn signals stopped working Ignore The LED Flasher Upgrade And Skip To Minute 8:23 In The Vid It Will Show Where The Flashers Are Located |
Re: Turn signals stopped working
Originally Posted by 350orbust
(Post 6528355)
I have an 84' Z28, and my turn signals (inside and outside) stopped working all of a sudden. I could use some help trouble shooting the problem! |
All times are GMT -5. The time now is 06:38 PM. |
© 2024 MH Sub I, LLC dba Internet Brands