TPI lower intake manifold base TPI lower intake manifold base for 1987 and later SBC. $75 shipped. Paypal preferred. EDIT: I incorrectly posted this as a pre '86 intake but a sharp eye member spotted my mistake. I also cleaned it up some for a faster sale, no additional charge. Intake dirty pic http://www.blackgto.com/sale/base.jpg Intake clean pic http://www.blackgto.com/sale/intakeclean.jpg |
Re: TPI lower intake manifold base Still for sale |
Re: TPI lower intake manifold base that is for a 87 and up |
Re: TPI lower intake manifold base No, it is for a 1986 and prior stock heads. I already mentioned that in the first post. If you have 1987+ heads then you'll have to slot the two center bolt holes on each side. |
Re: TPI lower intake manifold base if that in fact is your actual picture look at the 4 center holes they are indeed at a different angle that the other meaning it's from a 87 and up |
Re: TPI lower intake manifold base You have a sharp eye! It is indeed a '87 and later base intake manifold, not a pre '86 like I posted. I just briefly glanced at it while I was cleaning out the garage and posted it with a few other things I found. I have corrected the first post and added a clean picture of the intake I took today after a short while in my bead blaster. |
Re: TPI lower intake manifold base looks good i was gonna ask if you media blasted it. only reason i even noticed it was 87 /\ is because i need a 86 \/ since i recently got a L98 out of a 89 vette with aluminum heads i needs the 86 \/ intake i have the same one you are selling i thought you might of thought i was being a A*****E but none the less good luck with the sale |
Re: TPI lower intake manifold base Yes, I media blasted it using glass beads. They work best on aluminum. The manifold is still for sale. |
Re: TPI lower intake manifold base still for sale |
Re: TPI lower intake manifold base bump |
Re: TPI lower intake manifold base Still for sale, best offer. |
Re: TPI lower intake manifold base tap, tap...is this thing on? hello? |
Re: TPI lower intake manifold base TTT |
Re: TPI lower intake manifold base i'll give you $60 shippped |
Re: TPI lower intake manifold base
Originally Posted by JR Performance
(Post 3414552)
i'll give you $60 shippped Deal. Send payment to my paypal, millicanga@comcast.net and I'll get it shipped the next business day. John |
Re: TPI lower intake manifold base Currently I don't have paypal. Can I just mail you a check? |
Re: TPI lower intake manifold base
Originally Posted by JR Performance
(Post 3415619)
Currently I don't have paypal. Can I just mail you a check? PM sent with my address. |
Re: TPI lower intake manifold base Still for sale. |
Re: TPI lower intake manifold base Lots of interest, some commitments but no cash, no sale. Yes, still for sale. |
Re: TPI lower intake manifold base Once again, still for sale. I don't want to throw it away....... |
Re: TPI lower intake manifold base Don't feel bad. I'm still sitting on mine as well. |
Re: TPI lower intake manifold base Sold. |
All times are GMT -5. The time now is 03:15 PM. |
© 2024 MH Sub I, LLC dba Internet Brands