Big Comp Hyd. Roller Cam and Trickflow 1 pc. Chromoly Pushrods
 

Cam is hyd. roller with about one hour of run time!!! In great shape but I went bigger. Was originally a custom LT1 grind and the dowl pin has already been cut down for flawless gen I SBC use (duh, I used it :) )

I still have the cam card and the custom grind is Comp 3315/3316 on a 112 LSA.
.510/.520 lift
230/236 @ .050

If more info is needed please ask.
$200




Also, have a set of 7.400" Trickflow 1 piece chromoly pushrods. Practically new with same run time.
http://store.summitracing.com/partde...0&autoview=sku

$75

Re: Big Comp Hyd. Roller Cam and Trickflow 1 pc. Chromoly Pushrods
 

Standard Gen1 firing order?

Re: Big Comp Hyd. Roller Cam and Trickflow 1 pc. Chromoly Pushrods
 

Yes, gen I and LT1 are the same.
1-8-4-3-6-5-7-2

Re: Big Comp Hyd. Roller Cam and Trickflow 1 pc. Chromoly Pushrods
 

Yes, thank you. I was just wondering... since it's a custom grind I thought it might be a 4/7 swap or C-swap or something.

Re: Big Comp Hyd. Roller Cam and Trickflow 1 pc. Chromoly Pushrods
 

You're welcome :)

Re: Big Comp Hyd. Roller Cam and Trickflow 1 pc. Chromoly Pushrods
 

UP

Re: Big Comp Hyd. Roller Cam and Trickflow 1 pc. Chromoly Pushrods
 

:)

Re: Big Comp Hyd. Roller Cam and Trickflow 1 pc. Chromoly Pushrods
 

:burnout:

Re: Big Comp Hyd. Roller Cam and Trickflow 1 pc. Chromoly Pushrods
 

:nod:

Re: Big Comp Hyd. Roller Cam and Trickflow 1 pc. Chromoly Pushrods
 

Bump

Re: Big Comp Hyd. Roller Cam and Trickflow 1 pc. Chromoly Pushrods
 

up

Re: Big Comp Hyd. Roller Cam and Trickflow 1 pc. Chromoly Pushrods
 

TTT