Third Generation F-Body Message Boards

Third Generation F-Body Message Boards (https://www.thirdgen.org/forums/)
-   Engine/Drivetrain/Suspension Parts for Sale (https://www.thirdgen.org/forums/engine-drivetrain-suspension-parts/)
-   -   Super Ram plenum and runners (https://www.thirdgen.org/forums/engine-drivetrain-suspension-parts/508968-super-ram-plenum-runners.html)

BRIrocZ 01-24-2009 09:29 PM

Super Ram plenum and runners
 
LPE/Accel Super Ram plenum and runners. The runners have had some porting done to them. So the bad stuff, one of the runners had a crack it and was fixed with some epoxy, it has never leaked. There are 2 stripped plenum to runner bolt holes and finally the lid is slightly warped, I had used some RTV to seal it when I was running this setup.

$400 shipped
http://i428.photobucket.com/albums/q...z/IMG_0159.jpg
http://i428.photobucket.com/albums/q...z/IMG_0164.jpg
http://i428.photobucket.com/albums/q...z/IMG_0160.jpg
http://i428.photobucket.com/albums/q...z/IMG_0163.jpghttp://i428.photobucket.com/albums/q...z/IMG_0161.jpg

lltrevino 01-25-2009 12:41 AM

Re: Super Ram plenum and runners
 
I OFFER 300 SHIPPED,

BRIrocZ 01-25-2009 02:50 PM

Re: Super Ram plenum and runners
 

Originally Posted by lltrevino (Post 4020223)
I OFFER 300 SHIPPED,

Negative.

355tpipickup 01-25-2009 04:35 PM

Re: Super Ram plenum and runners
 
how big is the crack on the runners? got any close up pics of the crack? Im intersted

BRIrocZ 01-25-2009 04:59 PM

Re: Super Ram plenum and runners
 
I don't have any pics of the crack itself, its been a while but its maybe about 1/2 of an inch long. In the last pic of my first post you can see the outside of the runner where the epoxy was used to patch it and in this pic you can see the inside of that runner. The epoxy is rock hard, it's been like this and run with no leaks for about 6 years.

http://i428.photobucket.com/albums/q...z/IMG_0162.jpg

BRIrocZ 01-27-2009 11:26 PM

Re: Super Ram plenum and runners
 
bump

BRIrocZ 01-30-2009 07:26 PM

Re: Super Ram plenum and runners
 
$375 shipped.

BRIrocZ 02-05-2009 06:41 PM

Re: Super Ram plenum and runners
 
bump

lltrevino 02-05-2009 09:44 PM

Re: Super Ram plenum and runners
 
offer still available. to fix lid, runners, etc. correctly, one is taking risk of becoming junk.

Morit 02-06-2009 01:56 PM

Re: Super Ram plenum and runners
 
300$ would be to expensive for me for a cracked one.. Seems like a good deal..

BRIrocZ 02-06-2009 03:23 PM

Re: Super Ram plenum and runners
 
$300 shipped is lower than I'm willing to go considering all that is needed to get this thing functional again is to re-tap a couple of bolt holes.

I would consider $350 shipped but other than that I'll just hold on to it and put it back on the car. :)

355tpipickup 02-06-2009 03:45 PM

Re: Super Ram plenum and runners
 
how was the performance gain vs the stock tpi top? I have ported slp runners and plenum now but was thinkin about swapin to this....i love the low end the slp runnin give tho.

355tpipickup 04-02-2009 11:19 PM

Re: Super Ram plenum and runners
 
did they sell?

bowtie350_428 05-25-2009 02:18 AM

Re: Super Ram plenum and runners
 
Is this still for sale. Im in texas and I can pickup of you're in the San Antonio area.

Red89C4 05-28-2009 05:29 PM

Re: Super Ram plenum and runners
 
PM sent

Red89C4

BRIrocZ 05-28-2009 05:49 PM

Re: Super Ram plenum and runners
 
Not for sale anymore.


All times are GMT -5. The time now is 08:57 AM.


© 2024 MH Sub I, LLC dba Internet Brands