Originally Posted by dreamr3488 (Post 4641194)

Are you able to get other SBC AFR heads other than the 195's?
If so, I would like to price a set of race ready 220s and 227s with 65cc combustion chambers and angle plugs.
Thanks in advance.
You can email me at: dreamr3488@aol.com at your convenience.

Thanks again,

Darryl

Originally Posted by LS4GXP (Post 4655807)

4 more days till delivery!!!so excited, now i know thee car will be done by november :lock:

Originally Posted by LS4GXP (Post 4668188)

got them on the 2nd, UPS driver was a female, she used a dolly to bring the heads up to the door then pushed them off, meanwhile they slammed onto the concrete sidewalk. No padding what-so-ever in the box they shipped them in exept for 2 peices of plywood at each ends. Made a claim into UPS about it and said when i start my car up and theres a problem they owe me heads.

I would have thought buying AFR products ( one of the more exspensive compared to others ) they would have the heads wrapped up better in the box. When i bought Dyno dons headers i could have drove a mac truck over his box and they wouldnt have damaged the headers lol. Oh well it is what it is. Ill find out more come next month when she gets fired up

Only 1 good thing came out of this exsperience, and that was dealing with you rick, i thank you for all the email returns, hat goes off too ya, not so much to AFR's shipping proccess

Originally Posted by LS4GXP (Post 4668505)

the box they came in are damn near the exact size of the heads, the playwood on both ends are almost the exact width and height of the heads, but theres nothing in the center to keep anything from damaging them. Like i said, no bubble wrap, no nothing. My issues i think are both 50/50, AFR's fault for a very poorly package job, and UPS for sending a woman to do a mans job :P

I visually looked over the heads and dont see any cracks or bent studs, my fringers are crossed.

I figured i would give AFR 1 more chance to prove themselves to me lol I just ordered a set of black coated valve covers from them, ill see how the package is with those. If you sell good product then you should have good shipping, IMO. But maybe i was just a fluke, i did wait over 2 months remember :huh:

All the anger will probably go away when its fired up, running good, and am cruising down the road lol :burnout:

Originally Posted by LS4GXP (Post 4668685)

will do, only problem was i had the heads delivered to a co-workers house so his parents would be home and sign for the package, there in there 70's. So they didnt know what to do, if it was me i'd prob would have refused it.

I did make a claim in the UPS though so its on file if i do have problems with them

Originally Posted by LS4GXP (Post 4670454)

ill try to explain alittle better. Take a pair of aluminum heads, put them in a box just big enough for the heads. Now put them on a dolly, then push the box off the dolly and have them slam on concrete. Thats about 69lbs of aluminum hitting concrete. Thats why am worried.

Rick, i wish i knew that i would have went through you.

Originally Posted by LS4GXP (Post 4670708)

visually i dont think so, i will find out soon enough. Regardless i have a valid point, poor handling on UPS part, poor packaging on AFR's part. Your telling me this situtation would not aggrovate you in the least?

Not getting into a pissing match with you about this, am not gonna highjack this thread about my situation, rick asked, i responded. Ill drop it now

Originally Posted by TMFK (Post 4728423)

Just got my 1040 AFR's from 88BlackZ-51. Great to work with and great prices. Would highly recommend

Originally Posted by KWIK84 (Post 4789845)

Just waiting on one of my customers to pay off her bill, then I am all over these!!!!!!!!

Originally Posted by LilJayV10 (Post 4877258)

Can I get a price for a set of comp 220's w/ 65cc? I think the part number is 1110.

Originally Posted by 88BlackZ-51 (Post 4877324)

check your pm's. these for your 406?

Originally Posted by LilJayV10 (Post 4877506)

Yeah. I got another 400 block. Going solid roller this time. Tony recommended them for my build.

Originally Posted by Ice cold spit (Post 4881106)

Looking for a price on the 195's for my 383 1040 or 1034 I think for the straight plugs thanks

Originally Posted by gmsoldier (Post 4928592)

price on a set of 210's? part number is 1054

Originally Posted by FJA1791 (Post 4928996)

Looking for a pt # 1095 shipped to NJ....how much? Thanks Frank

Originally Posted by FJA1791 (Post 4929062)

Do they come with titanium retainers?

Originally Posted by 83 Crossfire TA (Post 4929139)

Do they still make anything that will work on a 305?

Originally Posted by 88BlackZ-51 (Post 4929131)

1040's dont come with titanium retainers unless you want to pay extra! They are 4140 Chrome Moly.

If you want a set then send me a pm.

Originally Posted by 88BlackZ-51 (Post 4929374)

They have 180's, but you would have to have a stout 305 for those.....

Originally Posted by FJA1791 (Post 4929586)

I was inquiring about pt # 1095 and just asking if they come with titanium retainers....if not how much. Thanks Frank

Originally Posted by 83 Crossfire TA (Post 4929862)

Yea but are they available with small valves?

Originally Posted by gmsoldier (Post 4930377)

i like the price, any estimate on shipping to 46226? also any idea on turn around to get them? thanks

Originally Posted by 88BlackZ-51 (Post 4930375)

2.02 and 1.60. Not sure if that is small to you or not.....

Originally Posted by 83 Crossfire TA (Post 4933377)

It's not going to work on a 305 with any decent lift...