224/230 Comp XFI cam, 234/242 Erson cam, Comp 1.52 Pro Magnums
 

1) 224/230 .541/.544 lift on 1.52 rockers Comp XFI camshaft. This is a custom grind on a 112 lsa + 4 advanced. Hyd. roller with SBC dowel pin installed. Asking $170 shipped. Has 5000 miles on it.

2) 234/242 .568/.544 on 1.6 rockers Erson camshaft. This is another custom grind by Joe Overton on 111 lsa + 1 advanced. Hyd. roller with LT1 dowel pin installed. Asking $160 shipped. Has 1500 miles on it.

Buyer will pay the Paypal fees.

Re: 224/230 Comp XFI cam, 234/242 Erson cam, Comp 1.52 Pro Magnums
 

Bump...offers.

Re: 224/230 Comp XFI cam, 234/242 Erson cam, Comp 1.52 Pro Magnums
 

Rockers no longer for sale.

Bump for the cams....I need these gone!!

Re: 224/230 Comp XFI cam, 234/242 Erson cam, Comp 1.52 Pro Magnums
 

Reduced prices...

Re: 224/230 Comp XFI cam, 234/242 Erson cam, Comp 1.52 Pro Magnums
 

Quick bump today!

Re: 224/230 Comp XFI cam, 234/242 Erson cam, Comp 1.52 Pro Magnums
 

Going up...need to sale guys....need some money.

Re: 224/230 Comp XFI cam, 234/242 Erson cam, Comp 1.52 Pro Magnums
 

Bump.

Re: 224/230 Comp XFI cam, 234/242 Erson cam, Comp 1.52 Pro Magnums
 

Bump!!

Re: 224/230 Comp XFI cam, 234/242 Erson cam, Comp 1.52 Pro Magnums
 

170$ shipped huh...ok ill take it! whats your paypal addy.... i leave out of town tomorrow mornin but i can have the money sent out asap when i get back sunday

Re: 224/230 Comp XFI cam, 234/242 Erson cam, Comp 1.52 Pro Magnums
 

Yenko,
How did the erson cam idle? Was it street friendly?

Re: 224/230 Comp XFI cam, 234/242 Erson cam, Comp 1.52 Pro Magnums
 

Well...I wouldn't put it in a daily driver but it idled fine tuned up.

Re: 224/230 Comp XFI cam, 234/242 Erson cam, Comp 1.52 Pro Magnums
 

Yep....got to get rid of it. I'll send you a PM.

Re: 224/230 Comp XFI cam, 234/242 Erson cam, Comp 1.52 Pro Magnums
 

Is that the correct exhaust lift figure?
Strange to have more duration but less lift on exh valve.

What application was it intended for?

Re: 224/230 Comp XFI cam, 234/242 Erson cam, Comp 1.52 Pro Magnums
 

Yes...its the correct lift. The XFI has less exhaust lift than intake lift from Comp so...you're starting to see more of this actually because the exhaust is pulled out from the engine at a higher velocity than the intake lets in. So, they more duration and less exhaust lift will be ok.

It was in a 383 with stockish heads.

Re: 224/230 Comp XFI cam, 234/242 Erson cam, Comp 1.52 Pro Magnums
 

Bump...both cams still for sale!!

Re: 224/230 Comp XFI cam, 234/242 Erson cam, Comp 1.52 Pro Magnums
 

224/230 cam is sold.

234/242 is still for sale!!