Third Generation F-Body Message Boards - [Sold] Procharger parts, Autometer Boost Gauge

Third Generation F-Body Message Boards (https://www.thirdgen.org/forums/)

- Engine/Drivetrain/Suspension Parts for Sale (https://www.thirdgen.org/forums/engine-drivetrain-suspension-parts/)

- - [Sold] Procharger parts, Autometer Boost Gauge (https://www.thirdgen.org/forums/engine-drivetrain-suspension-parts/604860-procharger-parts-autometer-boost.html)

Procharger parts, Autometer Boost Gauge

I sold my head unit and still I have alot of the supporting equipment for a procharger set up. Everything is brand new never used/installed except the pulleys and the LT1 Twin intercooler setup. Prices DO NOT include shipping.

* Surge Valve - sold

* 4" 12 rib pulley - sold

* Complete LT1 Twin High flow intercooler setup (includes piping, clamps and intercoolers in good used condition) - SOLD

* Fuel pump booster, mounted but never hooked to fuel, comes with wiring/relay also - SOLD

* FMU - SOLD

* New 3" single intercooler piping (No Intercooler) - Sold

* 2 5/8 Autometer (ATM-4801) carbon fiber ultra light Boost gauge 30" vac to 20psi in a pedestal mounting cup (ATM-3204), I noticed there is a slight ding in the trim ring on the bottom, it's not noticable when you look at the gauge and you can just barely see it in on the bottom of the trim ring in the pic below, comes with vacuum tube and T fitting and light socket. goes new for $75 and the mounting cup is almost twenty. - SOLD

* 8" drive pulley and mandrel w/ grade 8 bolts - SOLD

* oil feed and return lines for a D1/D1-B which should also work for a P600B also. - $40

https://lh3.googleusercontent.com/_1...0/IMG_2851.JPG

* Used 4.25" 8 rib pulley - $40

https://lh4.googleusercontent.com/_1...0/IMG_2841.JPG

https://lh4.googleusercontent.com/_1...0/IMG_2842.JPG

Re: Procharger parts

How much for the 12 rib 4" pulley? Mine currently has the 4.5" and im sure i will wanna step down soon enough.

Re: Procharger parts

Let me double check which is which. I have a 4.25 and a 4" on is an 8 rib and the other is 12. If the 12 rib is the right size, I am thinking like 40 + shipping.

Re: Procharger parts

i'll take the 12 ribbed pully for 40$

edit* the surge valve too if i can get the pully too.

shipping would be to 33604

Re: Procharger parts

Quote:

Originally Posted by ??? (Post 4834999)

i'll take the 12 ribbed pully for 40$

edit* the surge valve too if i can get the pully too.

shipping would be to 33604

You have a PM

Re: Procharger parts

do you have the wiring for the booster pump too? thanks

Re: Procharger parts

Quote:

Originally Posted by tom86iroc (Post 4837015)

do you have the wiring for the booster pump too? thanks

Yes sir I do have the wiring/relay for the booster pump, I put an new pic of the pump w/ the wiring.

Re: Procharger parts

Im interested in the twin intercooler setup. Can you shoot me a PM with your email address? I got a few questions for ya
Thanks!

Re: Procharger parts

Quote:

Originally Posted by irocz43 (Post 4839044)

Im interested in the twin intercooler setup. Can you shoot me a PM with your email address? I got a few questions for ya
Thanks!

PM'd ya