Holley Stealth Ram W/ Extras (NON-Vortec)
 

Hey All, Relisting this setup, the previous deal has fallen through.

I have a Holley Stealth Ram that I picked up off here a few months back.

Here is what the lot includes

- Stealth Ram upper and lower for standard SBC heads. it's a later casting with the inner bolt holes are drilled for 45* and 72* bolt holes.
- Holley Fuel Rails w/ crossover tube
- Kirban adjustable fuel pressure regulator
- Steel braided fuel lines with hose ends.
- 2/16" Autometer carbon fiber face fuel pressure gauge 0-100 psi
- All the -6 fitting necessary to connect the fuel pressure gauge and fuel lines from the rails.
- Thermostat housing
- Throttle cable bracket
- Factory 89-92 style TB modified to clear fuel rails, with trimmed IAC housing (coolant tubes removed)
- Multiple barbed fitting to connect vacuum accessories, there is a T fitting under the center of the manifold that isn't pictured.
- Heater hose fitting, distributor hold down, CTS, IAT, TPS and IAC sensors included. I cannot guarantee the condition of the sensors. It is my understanding they are in good working order.

***the fittings in the plastic bags on the floor next to the manifold are NOT included***


I am not really wanting to separate anything out, but I will if the price is right. This is complete and ready to bolt on, the only thing needed are the fittings to adapt the stock lines to -6 put injectors in it and go. My rough guesstimate is around $1000 to put everything here together new, not including shipping.

$525 Plus Shipping FIRM. Thanks for looking!

I am not in a rush/need to sell this, so don't bother offering anything less.

https://lh4.googleusercontent.com/-z...8_16.27.32.jpg

https://lh5.googleusercontent.com/-n...8_16.28.31.jpg


HSR Weiand Wieand Holly

Re: Holley Stealth Ram W/ Extras (NON-Vortec)
 

TTT....Lowered Price

Re: Holley Stealth Ram W/ Extras (NON-Vortec)
 

Do you still have the stealth ram set up for sale?

Re: Holley Stealth Ram W/ Extras (NON-Vortec)
 

Yes Sir

Re: Holley Stealth Ram W/ Extras (NON-Vortec)
 

TTT

Re: Holley Stealth Ram W/ Extras (NON-Vortec)
 

oh....sooo tempting.....wish i had the extra dough.

Re: Holley Stealth Ram W/ Extras (NON-Vortec)
 

There is another thread on this same setup by you sayng it is sold. Is this the same one or did the buyer back out??? I am leaning toward this....

Re: Holley Stealth Ram W/ Extras (NON-Vortec)
 

The setup is available! Unfortunately the buyer did back out.

Re: Holley Stealth Ram W/ Extras (NON-Vortec)
 

TTT

Re: Holley Stealth Ram W/ Extras (NON-Vortec)
 

^^^

Re: Holley Stealth Ram W/ Extras (NON-Vortec)
 

TTT....Changed Price.

Re: Holley Stealth Ram W/ Extras (NON-Vortec)
 

Just to let anyone know who is interested, this is my old setup. The IAC, IAT and TPS were brand new a couple years back and should only have about 10,000 miles on them. Same with the Kirban AFPR. They were all in perfect working condition when I sold this setup to Will.

Will, sorry your plans didn't work out.

Re: Holley Stealth Ram W/ Extras (NON-Vortec)
 

Thanks man, I had every intention of putting this on, but just after I bought this from you I got a SMOKING deal on a mini ram, so I went that route and put that on instead.

I put a volt meter on the TPS and CTS and the resistances are correct, so I am 99% they are good to go.

Re: Holley Stealth Ram W/ Extras (NON-Vortec)
 

TTT

Re: Holley Stealth Ram W/ Extras (NON-Vortec)
 

How much for just the intake and rails?

Re: Holley Stealth Ram W/ Extras (NON-Vortec)
 

$400 + shipping.

I have someone interested in the whole setup and I'd rather sell it as a whole, I am just waiting for them to get back to me.

Re: Holley Stealth Ram W/ Extras (NON-Vortec)
 

Very intersted. PM me. Shipping would be to 23456

Re: Holley Stealth Ram W/ Extras (NON-Vortec)
 

Pm returned earlier.

Re: Holley Stealth Ram W/ Extras (NON-Vortec)
 

Still for sale?

Re: Holley Stealth Ram W/ Extras (NON-Vortec)
 

SOLD