1973 Pontiac short block, heads, and misc parts
 

I have a 1973 Pontiac 350 short block that was rebuild about 15k ago that has been sitting on a shelf in my garage for about 3 years waiting to be dropping into my 3rd gen. I decided to go a different route.
At the time of rebuild it was overbored .030 to 3.905

The engine will come with the stock heads which have had a 3 angle valve job and also the timing cover, valve covers, oil pan, 4bbl intake with a rochester q-jet carb and a boc with all the lifters, rockers ect.

I am asking $250 pickup only. This engine with a big cam, performer rpm intake, full headers, and 6x-4 heads pulled high 12's in the 1/4 in a G-body grandprix. Pontiac was known for underrating they're engines and they were torque monsters.

I also have a brand new in the box edelbrock Performer aluminum intake $180

A set of vintage 70's M/T (Mickey Thompson) aluminum valve covers $75

A set of the sought after 1978 6X-4 small chamber high flow heads with
2.11/1.66 Valves (hardened seats). $225

A set of 1975 6H HO non air 455 heads
2.11 / 1.66 Valves $125