Lloyd Elliott AFR 1040's AGAIN 6 Attachment(s) I had these "sold" but things did not work out so they are for sale again. Here's a rundown. AFR 195cc heads part number 1040. They were run for about 2 hours previously by Anethes here from Thirdgen. I bought them from IrocZ30589 here who did not personally run these heads. They have been milled .035 by AFR to get the chambers down to 60cc. Springs are the AFR 8017's good to .600 lift. Valves are 2.05/1.60 that AFR uses. I took them to Lloyd Elliott who is one if the best hand porters out there. I've used him for SBC, LT1, LS1 stuff and have been very happy with his work. Look him up he knows what he's doing. They received a full port job on the intake and exhaust runners. Chambers were left alone as they did not need additional porting since AFR CNC's them. I had Lloyd flow them afterwards and these things are ridiculous. Was going to run a 1205 gasket. Flow number are 149/122 @ .200 208/171 @ .300 263/204 @ .400 298/226 @ .500 310/235 @ .600 314/239 @ .700 There is over $2k in these heads. $1500 shipped FIRM. Shipping to the lower 48 only. Zach Attachment 334617 http://i368.photobucket.com/albums/o...psae06daaf.jpg Attachment 334618 Attachment 334619 Attachment 334620 Attachment 334621 Attachment 334622 |
Re: Lloyd Elliott AFR 1040's AGAIN Bump. |
Re: Lloyd Elliott AFR 1040's AGAIN These are back I'm very interested...did Lloyd Elliot recommend a cam with these? I have split profile LE cam 230 duration 575 lift and 107 lsa |
Re: Lloyd Elliott AFR 1040's AGAIN Any bowl porting? |
Re: Lloyd Elliott AFR 1040's AGAIN If I decide to build a 383 stroker I just may...good luck with sale for now |
Re: Lloyd Elliott AFR 1040's AGAIN Any idea what valve springs they are? |
Re: Lloyd Elliott AFR 1040's AGAIN ..... Free Bump ... :thumbsup: ............ |
Re: Lloyd Elliott AFR 1040's AGAIN
Originally Posted by DAVE@CSC
(Post 5792042)
Any idea what valve springs they are? Bump these up. |
Re: Lloyd Elliott AFR 1040's AGAIN Bump. |
Re: Lloyd Elliott AFR 1040's AGAIN I'm surprised these haven't sold yet. Lots of CFM with a smaller port means high velocity airflow. Come on guys. |
Re: Lloyd Elliott AFR 1040's AGAIN I love these heads if I could convert em to lt1 cheap I would man |
Re: Lloyd Elliott AFR 1040's AGAIN
Originally Posted by dannyvera778
(Post 5807426)
I love these heads if I could convert em to lt1 cheap I would man |
Re: Lloyd Elliott AFR 1040's AGAIN Are these heads still available? |
Re: Lloyd Elliott AFR 1040's AGAIN Yes. They are still available. |
Re: Lloyd Elliott AFR 1040's AGAIN What part of Texas are you located in? I live in Mississippi so maybe I could do a local pickup if you aren't too far? |
Re: Lloyd Elliott AFR 1040's AGAIN I am near Dallas so it's pretty far. I am willing to ship them though. |
Re: Lloyd Elliott AFR 1040's AGAIN Are guide plates included or they come as is? |
Re: Lloyd Elliott AFR 1040's AGAIN
Originally Posted by RyanJB
(Post 5811376)
Are guide plates included or they come as is? |
All times are GMT -5. The time now is 12:52 PM. |
© 2024 MH Sub I, LLC dba Internet Brands