Vortec/Edelbrock TPI 5 Attachment(s) Edelbrock Hi Flow Vortec TPI base and runners with functioning egr valve and corvette EGR takeoff, fuel rails, oe fuel pressure regulator, Multec injectors (cores). Gasket matched and casting flash cleaned up- no major porting effort. Oem ported plenum. Comes with all vacuum ports and hei cover and vortec intake gaskets, new fuel rail o-rings. Needs bolts. $645 X9 Ford/Bosch gen-4 24lb injectors- barely used, modified for GM fuel rail. USCAR connector pigtails included. 280-158-138, 7C3E-AB. $250 Edelbrock 1910 Performer RPM Q-Jet carb, 850 cfm, Cliff's Performance (Ruggles) carb kit. $450 Milodon Diamond Stripper windage tray, SBC. $60 Upcoming package- Crower Enduro SS roller rockers 3/8in x 1:6 self aligning very good condition, lightly used LS7 roller lifters, OEM vortec roller cam (excellent core for regrind) $350 |
Re: Vortec/Edelbrock TPI Price? |
Re: Vortec/Edelbrock TPI bak to the top |
Re: Vortec/Edelbrock TPI Pm sent |
Re: Vortec/Edelbrock TPI I've had a few inquiries about parting out the TPI intake- will be sold complete. |
Re: Vortec/Edelbrock TPI if you decide to separate the intake let me know very interested in base only... |
Re: Vortec/Edelbrock TPI I'd be interested In the runners. |
Re: Vortec/Edelbrock TPI bttt |
Re: Vortec/Edelbrock TPI Understand not wanting to break it up. ....anyone wanna go in on this together? I'll give $325 for the base. ....so that's the runners, fuel rails, plenum, injectors, gaskets, etc. for someone else, for only $320. |
Re: Vortec/Edelbrock TPI Looking for a JBL MS-8 for a possible trade. Quality 6.5 comps/coax- Digital Designs, HAT, Focal, Image Dynamics,etc. |
All times are GMT -5. The time now is 10:48 PM. |
© 2024 MH Sub I, LLC dba Internet Brands