changing projects, parts forsale 9 Attachment(s) The project that I was working on in Hawaii came to an unfortunate end. It was stolen but I recovered it took all the good stuff off and planed on starting on a new one here in TX. But I bought a boat instead, now I want to clear some space in the garage. Prices are listed, if you would like me to install a part I can also do that for you, I will give you a very reasonable labor rate. Call or txt 808-67three-8one7one *Big break setup for the front. $ 500. your choice between modified stock spindles or 2" drop RaceCraft spindles sold (12.75 c4 vet HD rotors and 2 piston calipers, Hubs, and spindles this setup from Kore3 is $1100 (not a Kore3)) * Overhead console $50. Have one of each Hardtop, & T-Top both in very good condition with flashlights. * Sophen tube K-member and lower control arms with Del-sphere ends with weight jacks. This will come with new center link and tie rodend’s and ends. $700. Sold *2 sets of 92 taillights in good condition $50. A set. * New set of struts. $50 sold * founders performance camber strut mounts $125. Sold. * Hatch pull down latch 91-92 $125. * Power window motors $50 for the set R&L. Sold *Window sweeps R&L, inner & outer. $50. All parts are +shipping I'm near FT Hood TX. pickup would be preferred. Attachment 330735 Attachment 330736 Attachment 330737 Attachment 330738 Attachment 330739 Attachment 330740 Attachment 330741 Attachment 330742 Attachment 330743 |
Re: changing projects, parts forsale I'm interested in the power window motors, window sweeps, and founders performance camber strut mounts. Can I get pictures of the power window motor and window sweeps? And is all the mounting hardware included with the founders performance camber strut mounts? |
Re: changing projects, parts forsale Interested in the struts what brand are they or part # |
Re: changing projects, parts forsale Also interested in the struts, are they Monroe? Interested in the hard top console, if it's for a Firebird. I'm interested in the big brake set up, but I can't afford that and will have to do the work myself. |
Re: changing projects, parts forsale Next in line for window sweeps. Let me know what shipping is to 44077. I'm on the road today, but will be home tonight to finalize purchase. Thanks. |
Re: changing projects, parts forsale In interested in strut mounts 125 shipped? |
Re: changing projects, parts forsale
Originally Posted by 92rsvortec350
(Post 5840389)
Interested in the struts what brand are they or part # |
Re: changing projects, parts forsale Usually the brand name is right on the shock/strut as a big sticker. It looks like from the pic of the k-member that the shocks are kyb. If they are, I'll take them. How many miles on them? |
Would you sell just the LCAs? |
Re: changing projects, parts forsale Ok, some bad news, I only can find the set that I did not install. I will have to look in storage but I don't think they will be there. I think I may have put them in the bottomless green storage container (trash.) it will be a week tell i can get to storage. so I think the window sweeps are on hold. the struts are Excel-G by KYB, they are the ones in the photo posted earlier Less than 500 miles. the strut mounts include 99% of the hardware I am missing one 5/16 fine threaded looking nut and one washer. window motors are your basic GM 12 tooth motors. |
Re: changing projects, parts forsale 3 Attachment(s) |
Re: changing projects, parts forsale
Originally Posted by omarcamaro
(Post 5840331)
I'm interested in the power window motors, window sweeps, and founders performance camber strut mounts. Can I get pictures of the power window motor and window sweeps? And is all the mounting hardware included with the founders performance camber strut mounts? PM me and let me know if you still want these parts. |
Re: changing projects, parts forsale
Originally Posted by FlyDoc
(Post 5841247)
PM me and let me know if you still want these parts. |
Re: changing projects, parts forsale how much do you want for the struts and the roof console (if it's for a hard top and firebird)? |
Re: changing projects, parts forsale Are you willing to sell the modified Spindles only? |
Re: changing projects, parts forsale Interested in the 2in drop spindles, pm me a quote with shipping to 33183 |
Re: changing projects, parts forsale Hello, I am interested in the Centerlink and tir rod end assemblies? Shipped to 91750, Pay Pal. Dennis |
Re: changing projects, parts forsale How much for k member, arms,and links minus jacks. 48184. |
Re: changing projects, parts forsale payment sent, awaiting tracking number |
Re: changing projects, parts forsale I'll take a set of tailights... |
Re: changing projects, parts forsale Any interest in selling the K-member without the a-arms? I already have spohn A-arms. -- Joe |
Re: changing projects, parts forsale Dibbs |
Re: changing projects, parts forsale
Originally Posted by chiz420
(Post 5846205)
Dibbs Spent a few thousand bucks on a new heating system, insulation, and garage door on my shop. If I don't do something in there this winter my wife might make me move into it. -- Joe |
Re: changing projects, parts forsale received parts thanks omar |
Re: changing projects, parts forsale I realize that, but if you back out. Spent a few thousand bucks on a new heating system, insulation, and garage door on my shop. If I don't do something in there this winter my wife might make me move into it. Ha ha I hear ya Joe. Mine would kick my *** too.lol |
Re: changing projects, parts forsale
Originally Posted by FlyDoc
(Post 5840313)
The project that I was working on in Hawaii came to an unfortunate end. It was stolen but I recovered it took all the good stuff off and planed on starting on a new one here in TX. But I bought a boat instead, now I want to clear some space in the garage. Prices are listed, if you would like me to install a part I can also do that for you, I will give you a very reasonable labor rate. Call or txt 808-67three-8one7one *Big break setup for the front. $ 500. your choice between modified stock spindles or 2" drop RaceCraft spindles sold (12.75 c4 vet HD rotors and 2 piston calipers, Hubs, and spindles this setup from Kore3 is $1100 (not a Kore3)) * Overhead console $50. Have one of each Hardtop, & T-Top both in very good condition with flashlights. * Sophen tube K-member and lower control arms with Del-sphere ends with weight jacks. This will come with new center link and tie rodend’s and ends. $700. Sold *2 sets of 92 taillights in good condition $50. A set. * New set of struts. $50 sold * founders performance camber strut mounts $125. Sold. * Hatch pull down latch 91-92 $125. * Power window motors $50 for the set R&L. Sold *Window sweeps R&L, inner & outer. $50. All parts are +shipping I'm near FT Hood TX. pickup would be preferred. http://i1211.photobucket.com/albums/...notsostock.png http://i1211.photobucket.com/albums/.../3rdmockup.png http://i1211.photobucket.com/albums/...e/IMG_3489.jpg http://i1211.photobucket.com/albums/...e/IMG_3488.jpg http://i1211.photobucket.com/albums/...e/IMG_5391.jpg http://i1211.photobucket.com/albums/...e/IMG_3492.jpg http://i1211.photobucket.com/albums/...e/IMG_5453.jpg http://i1211.photobucket.com/albums/...e/IMG_3491.jpg http://i1211.photobucket.com/albums/...e/IMG_5452.jpg |
Re: changing projects, parts forsale Still have any of the taillights? |
Re: changing projects, parts forsale PM me and I can get some going your way. |
Re: changing projects, parts forsale
Originally Posted by transaero
(Post 5841336)
how much do you want for the struts and the roof console (if it's for a hard top and firebird)? PM me if you want one. |
Re: changing projects, parts forsale
Originally Posted by Pontiac_Pete
(Post 5846601)
Still have any of the taillights? Pm me if you want them |
Re: changing projects, parts forsale
Originally Posted by dannyvera778
(Post 5845888)
I'll take a set of tailights... |
All times are GMT -5. The time now is 05:56 PM. |
© 2024 MH Sub I, LLC dba Internet Brands